MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs

**v8klla** · 08-13-2008

At only 43psi we are getting closer and closer to that illusive 4 digit number

It seems like it has a lot more left in it, but we need it to hold together for a bit as we are Norwalk bound for the DSM shootout! Any guesses in regards to flywheel horsepower? Keep in mind this is through a 3 speed Ford automatic

Also, I want to thank our sponsors that have made this build so successful! The new CNC ported cylinder head from Performance CNC coupled with the Forced Performance Camshafts and Kiggly Racing Valve Springs & Retainers really helped on the top end compared to our previous setup!

Active Performance Cooling
Straight Line Specialties
Fuel Injector Clinic
JM Fabrications
Forced Performance
Kiggly Racing
Kaaz USA
Performance CNC
Jay Racing
Ksport USA
Motors By Gosh

**Halon** · 08-13-2008

way to go guys!

95talonracer · 08-13-2008

Looking really good guys. Are you sticking with this tune for the shootout or are you going to squeeze a tad more out of it? By the way what rear end is in the car that you will be running on?

**v8klla** · 08-13-2008

Quote:

Originally Posted by 95talonracer

Looking really good guys. Are you sticking with this tune for the shootout or are you going to squeeze a tad more out of it? By the way what rear end is in the car that you will be running on?

We will have to turn it down and make some shakedown passes before we can run anywhere near this power level, but even at say 600whp this car should fly

It is the OEM IRS configuration with 300M axles and a Kaaz LSD. Although this isn't the optimal setup it should get us by until we can get the four link in there.

Matt D. · 08-13-2008

Holy shit, that is nuts.

**Shane@DBPerformance** · 08-13-2008

Even at 600whp it will probably run deep into the 9s.

**Kracka** · 08-13-2008

Great work guys, it sounded like a real beast last Fri!

95talonracer · 08-13-2008

Any dyno videos?

**v8klla** · 08-13-2008

We should have some up soon

xheero · 08-13-2008

ahhhh...... DAMN!

turbotalon1g · 08-13-2008

Thats fucking sick.

half that power is 10s all day, esp. in that stripped shell.

Good luck in the upcoming events.

MustGoFaster · 08-13-2008

Nice!

turbotalon1g · 08-14-2008

Oh yeah, fuck dyno vids, street vids vs. blue car or at least Alex's car.
Maybe a blue mustang?
Orange supra?
Sat. at RF is a test day, what perfect timing for shake down runs.

niterydr · 08-14-2008

Well done guys, glad to see you got the top end sorted out!

A//// Guy · 08-14-2008

That is nuts! Way to go!

**scheides** · 08-14-2008

Flywheel HP? Hrm, prolly like 913 or so!

Turn the boost down a bit and make some passes on this thing!

BTW I was at thealignmentguy (jeff)'s shop when you called yesterday for an alignment on this thing....I LOL'd at his response to you! You GOTTA call that guy well ahead and make an appointment. He IS the best.

blageo23 · 08-14-2008

Nice job guys. I want to see this thing again!

niterydr · 08-14-2008

Chris, if you still need a last minute alignment you can try Leighton's garage, I had great success with them, good tooling there (Eden Prairie location).

**v8klla** · 08-14-2008

It's on its way to Norm's tire as we speak, but thanks for the referral!

FattyBoomBatty · 08-14-2008

Why don't you guys go to Golden Valley tire? It's like 3 blocks from you and they have aligned my car perfectly when others tried and failed (costing me two new tires) and others still told me it couldn't even be done.

They axed no questions and did it right.