|
MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
http://www.maperformance.com/gallery.../Modifying.gif At only 43psi we are getting closer and closer to that illusive 4 digit number ;) It seems like it has a lot more left in it, but we need it to hold together for a bit as we are Norwalk bound for the DSM shootout! Any guesses in regards to flywheel horsepower? Keep in mind this is through a 3 speed Ford automatic ;) http://www.maperformance.com/gallery.../FDSM43psi.jpg Also, I want to thank our sponsors that have made this build so successful! The new CNC ported cylinder head from Performance CNC coupled with the Forced Performance Camshafts and Kiggly Racing Valve Springs & Retainers really helped on the top end compared to our previous setup! Active Performance Cooling Straight Line Specialties Fuel Injector Clinic JM Fabrications Forced Performance Kiggly Racing Kaaz USA Performance CNC Jay Racing Ksport USA Motors By Gosh |
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
way to go guys!
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Looking really good guys. Are you sticking with this tune for the shootout or are you going to squeeze a tad more out of it? By the way what rear end is in the car that you will be running on?
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Quote:
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Holy shit, that is nuts.
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Even at 600whp it will probably run deep into the 9s.
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Great work guys, it sounded like a real beast last Fri!
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Any dyno videos?
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
We should have some up soon :)
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
ahhhh...... DAMN!
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Thats fucking sick.
half that power is 10s all day, esp. in that stripped shell. Good luck in the upcoming events. |
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Nice!
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Oh yeah, fuck dyno vids, street vids vs. blue car or at least Alex's car.
Maybe a blue mustang? Orange supra? Sat. at RF is a test day, what perfect timing for shake down runs. |
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Well done guys, glad to see you got the top end sorted out!
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
That is nuts! Way to go!
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Flywheel HP? Hrm, prolly like 913 or so! ;)
Turn the boost down a bit and make some passes on this thing! BTW I was at thealignmentguy (jeff)'s shop when you called yesterday for an alignment on this thing....I LOL'd at his response to you! You GOTTA call that guy well ahead and make an appointment. He IS the best. |
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Nice job guys. I want to see this thing again!
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Chris, if you still need a last minute alignment you can try Leighton's garage, I had great success with them, good tooling there (Eden Prairie location).
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
It's on its way to Norm's tire as we speak, but thanks for the referral!
|
Re: MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs
Why don't you guys go to Golden Valley tire? It's like 3 blocks from you and they have aligned my car perfectly when others tried and failed (costing me two new tires) and others still told me it couldn't even be done.
They axed no questions and did it right. |
| All times are GMT -5. The time now is 12:45 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.