FS : 1g awd SS 3inch Exhaust system 02 elim

[Pimpin Dsmstyle]

Pretty much just like the title says 1g AWD 3inch exhuast system

Stainless steel system
3 inches, minimal bends
o2 elim mitsu housing
Vband clamp actions Oo
Built by Jet a little over a year ago.
Sounds mint, kinda loud but aggressive in a good way

Asking 450 OBO. It's not uncommon for a system like this to exceed $1,000. The exhaust is still on my car until I find a stock setup. I converted everything to stock so this serves me nothing. I'd like someone to buy it while it's still on the car so they can hear it and see its fitment and everything. It works perfect.

952 201 0941. -Josh

[JET]

That is a damn good deal, everything is 304 stainless, including the V-band clamp and flanges, so it should still be like new. It is all mandrel bent.

[beachbum_jon]

how is it fitted over the rear axel..is it downsized to 2.75, or is it hammered in?

[xveganxcowboyx]

AWD exhausts go under the axle. Less bending than the FWD models.

If you're interested Pimpin, I have the exhaust off my car minus muffler sitting at my folks. It's ugly and rusty as hell, but it doesn't leak at all. Yours if you pick it up (Cannon Falls or possibly W. St. Paul). Or possibly trade for something little.

[JET]

It is full 3" all the way back. Even the O2 housing is a full 3"!

[Pimpin Dsmstyle]

I have the ghetto 2.5 inch system that came with a different car of mine but I might just get a stock setup to make life less complicated come car sale time ><

Not too interested in trades right now unless someone has some nice tires for 17's. Price is pretty firm as well. Jet gave my buddy a hell of a deal on this exhaust when he got it done and I bet materials cost nearly this much!

Thanks for the words Jet. I bet you're happy you haven't seen that car back in your garage haha.

[Pimpin Dsmstyle]

A guy was supposed to come check it out over the weekend but he never came out.

Bump.

[Pimpin Dsmstyle]

Still have it..

[acidrumz]

i might be interested if you still have it..
what type/brand muffler is on it? pictures would be nice also
lmk,
later.

[JET]

Straight through 3" SS muffler, should be a slant 4" tip on it.

[Pimpin Dsmstyle]

bump - Jet do you have any more of these mufflers layin around for sale? I've had several people ask me about the one I have..

[Pimpin Dsmstyle]

bump for price drop. $400

[JET]

I think I have 1 or 2 around.

[Pimpin Dsmstyle]

This needs to go. Open to smaller exhaust system ( preferably 2.5inch cat back) ++ cash for this system. This really is a bit over kill for a 14b powered car.

[Goat Blower]

Originally Posted by Pimpin Dsmstyle

This needs to go. Open to smaller exhaust system ( preferably 2.5inch cat back) ++ cash for this system. This really is a bit over kill for a 14b powered car.

There's no such thing as too big of exhaust.

If my beater was a 1G, I'd pick this up. I've got a full 3" system on my T-25 powered 2G.

[1QUICK4]

Will this pretty much bolt up to a 91 GVR4?

[Pimpin Dsmstyle]

Originally Posted by 1QUICK4

Will this pretty much bolt up to a 91 GVR4?

I have no idea to tell you the truth. I'm sure one of the GVR4 champs would know better than myself. I've never owned one :P

[Pimpin Dsmstyle]

Originally Posted by 1QUICK4

Will this pretty much bolt up to a 91 GVR4?

I did a little research and it seems a GVR4 is just a little longer.

I also took pictures the best I could yesterday. I got shots from in the engine bay, under the car from a couple angles and from the rear. I'll have them loaded by the weekend. It's my parents camera so I have to go there to upload the pictures.

[Jakey]

I can't find anything in my PM's but it is sounding very familiar; didn't I try to buy this from you last Fall but you said it was sold?

[Pimpin Dsmstyle]

I'm not sure. I know I wanted to sell it before the car ran again but I never did for w/e reason. I like it alot. My guess is it would of been I didn't wanna ship it? I'm not sure.