New product devolopment - Page 2

**mx3twinturbo** · 05-11-2009

Thanks for all you input guys!!!

turbotalon1g · 05-11-2009

I was talking to mike about AFPR mounting brackets, he said it would be a possibility.

**mx3twinturbo** · 05-11-2009

Yep, Its a possibility...
Actually already have one done, (on sleepydsm's car)
Just need to draw up a CAD drawing for it,
though Matt (turbomiata) is out of town for 2 weeks so it will be available sometime after he gets back, he does all of the CAD and Plasma cutting here,
I wish he was still here cause in the last few days we have had a few more products to start producing.
Jesse-

turbotalon1g · 05-11-2009

lol, I am full of a ton of ideas.

GREASEMONKEY · 05-11-2009

Haha feel free to give us a few of those ideas, We have quite a bit of ideas / products were starting to make but im sure there are some things we haven't thought of yet.

turbotalon1g · 05-11-2009

Just glad to see you are making some DSM shit, some of us are feeling forgotten.

**Kracka** · 05-12-2009

EGR block-off plates are easy to make and universal between DSM's and Evo's.

blageo23 · 05-12-2009

Quote:

Originally Posted by Kracka

EGR block-off plates are easy to make and universal between DSM's and Evo's.

Already done

s1ngletracker · 05-15-2009

You should make a 1g motor mount that isn't such a big ugly piece as the stock one. Maybe one that doesn't even use the mount on the front of the engine, if that makes sense. I believe the 2g one doesn't have that.

blageo23 · 05-15-2009

Quote:

Originally Posted by s1ngletracker

You should make a 1g motor mount that isn't such a big ugly piece as the stock one. Maybe one that doesn't even use the mount on the front of the engine, if that makes sense. I believe the 2g one doesn't have that.

Take a look at SleepyDSMs engine shots. He chopped his off and welded in a square in where he chopped it. We can definatly do that for you if you bring it by.

Kevin 1G Drummer · 05-16-2009

Quote:

Originally Posted by blageo23

Take a look at SleepyDSMs engine shots. He chopped his off and welded in a square in where he chopped it. We can definatly do that for you if you bring it by.

I've done the same thing. You can only do that if you aren't running power steering.

**Kracka** · 07-10-2009

Any progress on the radiator support brackets? Also, have another product idea for you, how about a radiator cooling plate like the one linked below, but with the intake snorkel opening optional since some do and some don't run it?

http://www.customcarscentral.com/gdy...o-viii-ix.html

**scheides** · 07-10-2009

+1, I want one!

http://www.cimotorsports.net/motor-s...plate-evo.html

ditch the hole on the side so its all solid except for the latch.

Hrm, I have kinda a list of stuff for you guys on my car, this would certainly be pretty pimp if it was polished

turbotalon1g · 07-10-2009

Make some of that air diversion shit for DSMs you know everyone would use it since most have heating problems or would just like to run cooler.

**goodhart** · 07-11-2009

Quote:

Originally Posted by turbotalon1g

Make some of that air diversion shit for DSMs you know everyone would use it since most have heating problems or would just like to run cooler.

^^^This.

I would also buy some radiator support brackets in a heartbeat, mine are beyond gone.

Kevin 1G Drummer · 07-11-2009

I'm pretty sure the stock DSM core support is already solid between the top of the bumper and the front edge of the radiator (between the headlights), so something like that would be pointless on a 1g.

turbotalon1g · 07-11-2009

what about between the intercooler and radiator or all the other ducting that pep\ole make? I know that most take out the stock plastic stuff and leave it open, even though a nice plate similar to what bman has would be nice.

blageo23 · 07-12-2009

Starting Monday I will be a full time Primo Performance employee. We will have more time to get customer cars in and out alot faster, and develope more products. I will try and see if I cant get a prototype of the Evo radiator cooling plates. We also scrapped the original radiator mounting brackets and will be developing more in the near future.
As for the ducting for the raditor, we will look into it and see what we can develope. I just feel that with all the different FMICs out there it will be hard to make a universal one.

95talonracer · 07-12-2009

Quote:

Originally Posted by blageo23

Starting Monday I will be a full time Primo Performance employee. We will have more time to get customer cars in and out alot faster, and develope more products. I will try and see if I cant get a prototype of the Evo radiator cooling plates. We also scrapped the original radiator mounting brackets and will be developing more in the near future.
As for the ducting for the raditor, we will look into it and see what we can develope. I just feel that with all the different FMICs out there it will be hard to make a universal one.

What happened with your other job?

sleepydsm · 07-12-2009

Quote:

Originally Posted by Kevin_1G_Drummer

I've done the same thing. You can only do that if you aren't running power steering.

I ran power steering with mine chopped.