HUGE *Grand Opening* July 22nd

[v8klla]

Activites start at noon on Saturday July 22nd.


FREE Dyno Time!


~ This will be on a first come, first serve basis. Participants will be limited to two runs, and must be ready to dyno prior to their scheduled time.


Beat the Shop Car Dyno Competition


~ Beat our shop car and win some cold hard cash! Prizes will be awarded based on the number of cylinders as follows:

4 Cylinders/Rotary: $100
6 Cylinders: $50
8+ Cylinders: $25

*In the event of shop car failure and/or mechanical issues the threshold will be set at 650 whp.


Dyno Exhibitions


~ Some of the biggest and baddest cars around will be on our Dynojet Dynamometer for your viewing pleasure!


Tons of Door Prizes


~ From free dyno time to free entry to Rock Falls on July 29th, you don't want to miss this!


Car Show w/Prizes


~ Show off your stuff. Prizes will be awarded for best of show, best all-around performer, etc.


Free Food and Beverages

~ We will be manning the grill and providing non-alcoholic beverages to everyone that attends!


Keep you eyes peeled for additional updates! Don't miss this!

[niterydr]

This would be fun to attend, but with rockfalls having a test and tune day saturday and DB having the summer bash SUNDAY I don't think I can attend.

[v8klla]

Believe me we realize the conflicts lol, you forgot to mention the fact that carcraft is that weekend! We just figure that FREE Dyno time, FREE food, and TONS of FREE prizes will draw somewhat of a crowd...

That's a shame though, there would be $25-$100 in it for you if you take down the shop car

[niterydr]

Yeah, I didn't want to mention the outside events happening besides rock..carcraft is huge.

I can't convert my car to 2wd to take the $50....and even if i could, I am too damm lazy. Plus, it is going to spin the rollers on sunday over at DB. I am unsure how the car will even like that, it is very particular about our dyno, hopefully it likes to play nice on others. If you want to spin our rollers for a comparision, we can talk.


Good luck with the event chris.

[FattyBoomBatty]

Free is for me. Sounds like a fun filled weekend!

[Kracka]

Damn, too bad I have a wedding that day! Maybe I can come beforehand...

[98gstaherns]

Hmm free dyno..Tempting

[95talonracer]

I wish that my tranny hadn't gone out a few weeks ago otherwise i'd be there right away.

[v8klla]

Keep in mind that whether you drive there or not, there are still free door prizes, free food, a car show, and hopefully some pretty awesome dyno exhibitions... Believe me it will be worth the trip

Chris

[tim]

Well between Car Craft and some DSMstyle events this weekend I hope to be in the TC area. If I am I will be sure to stop by.

I was up last friday and someone from your business(maybe you?) put a business card type thing on my buddies 2g Talon while we were at Porkys BSing.

[v8klla]

Yeah we're doing some grass roots advertising as well lol, Wait until next weekend when we have the grand opening flyers to hand out lol.

Chris

[MATCHBX]

We may have to stop up there. No dsm though. Just the bike. Plenty fast for me right now with only a little over 100hp. Still beats just about every car on the road.

[niterydr]

Originally Posted by MATCHBX

We may have to stop up there. No dsm though. Just the bike. Plenty fast for me right now with only a little over 100hp. Still beats just about every car on the road.

100hp? What bike do you have again?

[MATCHBX]

01 ZX6R Kawi.
108hp@12000rpm

That's the numbers from a 1999.

[Tauni]

I will show up for a little while before car craft. Sounds like a good time to me!

[s1ngletracker]

apparently i'll be there too.

[Turbocharged]

Specifics on the shop car? What are you expecting to put down?

[v8klla]

I'm glad you asked

1995 Mitsubishi Eclipse GSX
2.4l 4g64

- 4G64 2.4 liter Block and Nitrated Crank
- Balanced rotating assembly, align honed, decked block/head
- ACL Race Bearings
- Wiseco Teflon Coated Pistons
- Crower Connecting Rods
- Balance Shaft Eliminator
- A/C Delete
- P/S Delete
- ARP head studs/Main studs
- Prothane Urethane Motor Mounts
- Cometic Steel Head Gasket
- Crower 64415 Race Camshafts
- Crower valve springs and retainers
- Ferrea 1mm Oversized Valves
- Ferrea Bronze Valve Guides
- MAPerformance Race Ported Head
- Fidanza adjustable cam gears
- PT71 GTQHP Turbocharger
- Revhard Cast T4 Exhaust Manifold
- Tial 38mm external waste gate
- Custom 3” downpipe/O2 sensor housing
- 4” Full Exhaust
- Dual Walbro 255hp Fuel Pumps
- -8 AN Fuel Feed Line
- Aeromotive Fuel Pressure Regulator
- FIC 1600cc Fuel Injectors
- Switzer Performance Coil on Plug Ignition
- DSMlink engine management
- Infiniti Q45 3.5” Throttle Body
- Magnus Motor Sports Full Race Intake Manifold
- Phenolic Spacer
- Spearco 2-216 Front mount intercooler
- Custom 3” to 3.5” Intercooler Piping
- Tial Blow off valve
- 3.5 “ GM MAS and Mass Airflow Translator
- Quarter Masters Twin Disc Clutch/Flywheel
- TRE Center Differential Spool
- Hoosier 9.5” Quick Time Pro Bias Ply Tires
- Weld Racing Draglite Wheels
- Rear Strut tower brace

[v8klla]

Anyone for some bench dynoing? I know how much we love that around here

[FattyBoomBatty]

Have I see that car before? is it red?

I bet my car could make 250 on a dynojet...