Swifty's never-ending project thread! - Page 4

C3L1CA · 02-20-2009

Looks good! Where did you get the fuel pumps from and did you use any special connector to wire them up?

Swifty1638 · 02-20-2009

i got them through the dealership from ford..and i wired them myself.

-A. Swift

FattyBoomBatty · 02-20-2009

And you're scared of a little engine wiring?

Swifty1638 · 02-20-2009

lol i want good clean wiring, and we where trying to find out why my car never revved..if I REALLY HAD to tackle the wiring, i woulda done it myself, as I do on customer's cars at work, BUT i'd rather have John do it, as it's proper, and he has the correct tools for the right job.

-A. Swift

sleepydsm · 02-20-2009

Quote:

Originally Posted by Swifty1638

and he has the correct tools for the right job.

-A. Swift

Shouldn't you too, as a mechanic? It's just a matter of being in a little more debt to the tool guy of your choice.

Swifty1638 · 02-20-2009

yea i know..which i hate. I loose motivation to work on my own shit when thats all i do. So, John was the motivator!

4g63tcrazy · 02-20-2009

Shit.. I did my whole tuck with electrical tape and scissors!

turbotalon1g · 02-20-2009

Glad you will finally get this done, setup looks baller.

Glad that you also stopped sending me pic messages of your shit.

So 10s this year?

Swifty1638 · 02-20-2009

lol sorry buddy. As far as the time, we shall see...remember, i've never done the drag stuff at a track. on these tires, 10's would be balla status!

-A. Swift

**scheides** · 02-20-2009

Wait, you track this car?

Swifty1638 · 02-20-2009

That's the goal anyway...

-A. Swift

turbotalon1g · 02-20-2009

Quote:

Originally Posted by Swifty1638

lol sorry buddy. As far as the time, we shall see...remember, i've never done the drag stuff at a track. on these tires, 10's would be balla status!

-A. Swift

not really, you make enough power and the guy you copied did.

good luck either way.

Swifty1638 · 02-23-2009

copied? yeaaaa....riiiight. cuz the wheel can be re-invented SO many times. I've copied no one, besides my own ideas. so what if others have had a black talon with a 67mm turbo and etc etc on it..know how many white 1gs with cf hoods and 16g's there are?

Anyway, more wiring is done tonight. Intake manifold and pipes are now on as is the tb, with all gaskets and such. vac. lines are all run. FJO is moved/mounted. Just needs power/ground. MSD is mounted in the car now, wiring is done. Grounds are all done.

list of what's left:
finish wires for COP/MSD
+/- for FJO
clamps for rest of pipes
WG mounted
degree cams/put timing side back together/vc gasket/etc
bumper/lights go back on
pass. seat back in/harnesses remounted
swap gasses
mod AEM map
start.

Hopefully this coming weekend, it will be ready. That's all for now!

-A. Swift

Swifty1638 · 02-28-2009

New dual spring WG, dump tube, and intercooler coupler clamps are all on. Car should be finished up later today. And, running. Then i'll button it all up. The REAL trick will to be if I can take/send/post a vid with my phone.

-A. Swift

sleepydsm · 02-28-2009

Sweet, can I have a ride sometime!?

Swifty1638 · 02-28-2009

Sure! Oh, I also ordered that same filter you got..9" long, 4" inlet KN filter..Should be here monday. We still gotta mock up an intake pipe, but that's not a super high concern.

-A. Swift

turbotalon1g · 02-28-2009

Quote:

Originally Posted by Swifty1638

copied? yeaaaa....riiiight. cuz the wheel can be re-invented SO many times. I've copied no one, besides my own ideas. so what if others have had a black talon with a 67mm turbo and etc etc on it..know how many white 1gs with cf hoods and 16g's there are?

-A. Swift

A certain evil eagle circa 2004 comes to mind, but i have not seen any white 1gs with fiber hoods, black evo wheels on 16g running 11s all day. There are a few panda 1gs around here but everyone that calls me thinking that its me says they get close and they are piles.

Anywho, you gonna be ready for the cruise? I am gonna look for a good video camera be a good time to get some footage of some good rolls.

You, hill, halo would make for a good 3 way

Swifty1638 · 02-28-2009

If I can get it on the rollers, the cruise is a go. I'm jsut shooting to knock Peter's new Audi down

-A. Swift

At-Least-It's-An-Evo · 02-28-2009

Quote:

Originally Posted by turbotalon1g

but i have not seen any white 1gs with fiber hoods, black evo wheels on 16g running 11s all day.

I hope that is sarcasm or you must not be looking that hard. That was 2007's hot street setup color/combo.

turbotalon1g · 02-28-2009

Yeah it was don't worry. Plus we all know i didn't decorate the car apart from the sweet wheels and way better hood latches.