HUGE *Grand Opening* July 22nd

[niterydr]

Originally Posted by v8klla

Anyone for some bench dynoing? I know how much we love that around here

Still on a link?
I thought dsmlink had a "no more horsepower" switch around 700whp on a dynojet?
I bet it hits 700 . Are you guys tracking it soon? I should have some race gas numbers for sunday if all things go well.

[slowbubblecar]

I would like to go if my FWD car was ready. I wouldn't be able to go until after 3:30 though.

[v8klla]

Yes it is red, and for the time being and most of last season missing a front bumper lol.

And yes we are still on DSMlink, and running suprisingly well with the GM 3.5" MAFT setup...

We do have some preliminary numbers, but for now we'll just say that things are looking promising I guess anyone wanting actual numbers will just have to swing on by Saturday and see it in action!

[niterydr]

Originally Posted by v8klla

Yes it is red, and for the time being and most of last season missing a front bumper lol.

And yes we are still on DSMlink, and running suprisingly well with the GM 3.5" MAFT setup...

We do have some preliminary numbers, but for now we'll just say that things are looking promising I guess anyone wanting actual numbers will just have to swing on by Saturday and see it in action!

I might come by post track, how long are you running the shin-dig?

[v8klla]

Scheduled from 12-9, however it could easily run later...

Chris

[niterydr]

Originally Posted by v8klla

Scheduled from 12-9, however it could easily run later...

Chris

Sweet, I should beable to stop by. Plymouth is on the way from Maple Grove to Wayzata, unless we just drive straight home from the track. (home being Wayzata for the night).

[Shane@DBPerformance]

Originally Posted by v8klla

I'm glad you asked

1995 Mitsubishi Eclipse GSX
2.4l 4g64

- 4G64 2.4 liter Block and Nitrated Crank
- Balanced rotating assembly, align honed, decked block/head
- ACL Race Bearings
- Wiseco Teflon Coated Pistons
- Crower Connecting Rods
- Balance Shaft Eliminator
- A/C Delete
- P/S Delete
- ARP head studs/Main studs
- Prothane Urethane Motor Mounts
- Cometic Steel Head Gasket
- Crower 64415 Race Camshafts
- Crower valve springs and retainers
- Ferrea 1mm Oversized Valves
- Ferrea Bronze Valve Guides
- MAPerformance Race Ported Head
- Fidanza adjustable cam gears
- PT71 GTQHP Turbocharger
- Revhard Cast T4 Exhaust Manifold
- Tial 38mm external waste gate
- Custom 3” downpipe/O2 sensor housing
- 4” Full Exhaust
- Dual Walbro 255hp Fuel Pumps
- -8 AN Fuel Feed Line
- Aeromotive Fuel Pressure Regulator
- FIC 1600cc Fuel Injectors
- Switzer Performance Coil on Plug Ignition
- DSMlink engine management
- Infiniti Q45 3.5” Throttle Body
- Magnus Motor Sports Full Race Intake Manifold
- Phenolic Spacer
- Spearco 2-216 Front mount intercooler
- Custom 3” to 3.5” Intercooler Piping
- Tial Blow off valve
- 3.5 “ GM MAS and Mass Airflow Translator
- Quarter Masters Twin Disc Clutch/Flywheel
- TRE Center Differential Spool
- Hoosier 9.5” Quick Time Pro Bias Ply Tires
- Weld Racing Draglite Wheels
- Rear Strut tower brace

Anyone for some bench dynoing? I know how much we love that around here

Judging by the mods compared to other 2.4l big turbo cars I have done, maybe 750whp on a Dynojet at 30-32psi. Maybe 800whp+ at 35-40 psi.

[v8klla]

Hey all, we're averaging 4 cars/hour on the dyno, FOR FREE! Stop down and get yours on!

Also, we just got word that Fast Mark will be dynoing with us later on tonight, you know the blue T76 turbocharged Mustang Cobra making a ton of power...

Should be fun to watch.

Chris

[niterydr]

Originally Posted by v8klla

Hey all, we're averaging 4 cars/hour on the dyno, FOR FREE! Stop down and get yours on!

Also, we just got word that Fast Mark will be dynoing with us later on tonight, you know the blue T76 turbocharged Mustang Cobra making a ton of power...

Should be fun to watch.

Chris

I'll be down there. I am currently at 27psi on my c-16 tune.
I'll just say one thing, I hope someone plans on breaking 600awhp on db's dyno tommorrow.

[Goat Blower]

Originally Posted by niterydr

I'll be down there. I am currently at 27psi on my c-16 tune.
I'll just say one thing, I hope someone plans on breaking 600awhp on db's dyno tommorrow.

Looks like you're it. I just got done with plumbing up my new fuel system, but it won't be wired or tuned by tomorrow. I could probably finish it this evening, but the wife is already bugging me to come home. Doh. To be young and single again.

[v8klla]

Shop Car Results: 681whp ~530 ft/lbs torque

Lots left to see!

CC

[niterydr]

Originally Posted by v8klla

Shop Car Results: 681whp ~530 ft/lbs torque

Lots left to see!

CC

Gonna be out playing tonight? I will .

[Halon]

I'd stop by, but I don't have the means to convert to FWD.

[95talonracer]

How did fast mark do lastnight?

[v8klla]

Mark didn't make it out, but Noah did with his white cobra. I don't know if I should start spouting off numbers though lol... Some of the guys choose to keep those on the DL.

CC