Front Half-shaft Issues...NEED ADVICE PLEASE

[TGPilot]

Looks like a reputable company on the net! Thanks I will look them up next time.

I was in a panic to try and do this tommorrow, but received a PM from Raptor to ease my worries!!

Thanks all!

-Kenny

[TGPilot]

Well got the oil pan and half-shafts done today! It was a bitch and a half trying to get the circlips to let go of the inner portion of the shafts...but went back together easier than coming apart.

For everyone's info if you care...NAPA p/n's for the half shafts are:

non-NAPA p/n 40-14010 for right front
non-NAPA p/n 40-19281 for left front

Only thing that mattered was that it is an AWD Manual tranny. They list as a NON-ABS axle...but as I found out the ABS clip is on the hub...not the axle itself.

Thanks for everyone's input and help!

-Kenny

[LightningGSX]

Originally Posted by TGPilot

They list as a NON-ABS axle...but as I found out the ABS clip is on the hub...not the axle itself.

So you have an ABS vehicle with non ABS axles? Don't the ABS axles have the gear teeth that the wheel speed sensor reads?