My first DSM

[Gillyjuice]

The clutch slipped under load in 3rd gear or higher. I checked all the basics,fluid,cmc adjustment and bled the system. Nothing changed so lets pull the trans. The previous owner had a clutch put in 7000 miles prior to my purchase. It appears that the flywheel was machined but the machinist did not consider step height,milling the friction surface and not milling the pressure plate mounting surface. Everything has signs of heat damage and uneven wear. The picture doesn't do the damage justice and I seem to have lost pics of the clutch disc and flywheel. Big thanks to Wade for helping pull the tranny.