Ricks-TURBO TALON

[talonsway]

Not much of anything really happen. Spent most of my weekend welding up storage racks, and painting cabinets. But i picked up a driver side fender to replace mine that has a dent and rust. Also a 2g throttle body. I rebuilt it and put on a block off plate.



A while back when i was trying to tune. I had problems pulling codes from the car. The engine light was on and it would say there where no codes. I used 3 different scanners. So i ended up clearing them using evoscan and forgetting about them. But i got a App for my iphone called EngineLink, and using a ELM327 OBD2 scan tool it pulled the codes with ease. Came up with 4 codes:

P0120- Throttle/ pedal position sensor

P0110- Intake air temperature sensor

P0100- Mass or volume air flow circuit

P0105- Manifold absolute pressure/ barometric pressure

So plan is going to start to get each of those codes fixed, and hopefully that will fix my idle issue i have going on. And if not i will put on the 2g throttle body that i have with the block off plate.