MHI TDO6 20g ready to bolt on!

[Tachyon]

The TD06 will provide more lag - dependent on the exhaust housing size. I did PM the OP for the housing size. Being you're FWD, you probably would enjoy the larger turbine wheel and housing.

I currently rock the TD05 turbine in a 6cm housing on a 2.4 and that will produce around 20 psi by 3800 RPM. My best guess is the TD06 in a 060 or 070 would be about 800 RPM later on 2.0 than my TD05 2.4.

With FWD, E85, and required supporting mods this turbo will go past 500 WHP on a DJ.

Hell of a bargain.

[dsm_talontsi]

Originally Posted by Tachyon

The TD06 will provide more lag - dependent on the exhaust housing size. I did PM the OP for the housing size. Being you're FWD, you probably would enjoy the larger turbine wheel and housing.

I currently rock the TD05 turbine in a 6cm housing on a 2.4 and that will produce around 20 psi by 3800 RPM. My best guess is the TD06 in a 060 or 070 would be about 800 RPM later on 2.0 than my TD05 2.4.

With FWD, E85, and required supporting mods this turbo will go past 500 WHP on a DJ.

Hell of a bargain.

I guess my goal right now is around 4-450. Im trying to stay away from e85 until spring

[bigboostingst]

I never said the turbo was comparable to a 16g, only that the spool was comparable. I wouldn't classify 300 RPM later spool as "a lot" but to each their own. Either way the turbo was sold yesterday, thanks for the offer anyways though!

[munchgsx]

Have a photo of the hot side?