06-02-2011
|
#201
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
Well..... I did a boost leak test and had a MASSIVE BOOST LEAK ( wont hold more then 1lb of pressure.. ) where I believed to be between the SMIM and head so I took all that shit apart and put some black rtv on both sides of my plastic gasket. Well, after putting it all back together I did the leak test again just to find out that it was actually my Injector O-Ring..... So I'm headed up to Primo to get some new ones and try it again.. I'll keep you guys updated.
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
06-02-2011
|
#202
|
|
Finally Tuned...
Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
|
Re: GsXtUrBo98's 2G project thread
Quote:
Originally Posted by GsXtUrBo98
Once it warms up I should be good though right? Or do I have to worry about this all the time?
|
figure out a way to get that iacv hooked back up! There are more then a hand full of people my self included that have done the same thing that you did and all say it sucks. its not robbing you of any power so get it back on there.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**
Amsoil Dealer
|
|
|
|
|
06-02-2011
|
#203
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
^Negative. On a side note I got my injectors sealed up and ready to go. I have some leakage from the tb seals... When I got it all hooked back up I went to start it and the battery was dead...... Well, I'm going to bring my battery to work tomorrow for charging and then see what happens after I throw it back in.
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
|
06-02-2011
|
#204
|
|
Finally Tuned...
Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
|
Re: GsXtUrBo98's 2G project thread
Is there a positive you see to not putting it in besides not taking a few minutes to get it to go back in? It isnt hurting your power at all so why not have it run better? If you ae using a dsm TB then why not hook it up? I can see if you had a q45 or something.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**
Amsoil Dealer
|
|
|
|
|
06-02-2011
|
#205
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
It clears up space. Those coolent nipples catch on my fuel line and I don't like the clutter
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
|
06-03-2011
|
#206
|
|
Transmission destroyer
Join Date: Feb 2007
Location: Cambridge
Drives: G37, 91 TSi
Posts: 7,150
|
Re: GsXtUrBo98's 2G project thread
Car that runs nicely > Pretty engine bay IMO
__________________
Quote:
Originally Posted by scheides
I swing from the nuts of cold hard data. Anything less is a guess.
|
|
|
|
|
|
06-03-2011
|
#207
|
|
Got Boost o_O'' m
Join Date: Sep 2009
Location: In a house
Drives: 1991 Eagle Talon TSI AWD Spooling Fiddy Trim Style
Posts: 1,389
|
Re: GsXtUrBo98's 2G project thread
This is a very nice car, youve made amazing progress on it as well. Its very inspiring, and a real motivator to continue the visual aspect of my project instead of just focusing on the performance. Turning and stopping fast is just as fun as straight line speed.
|
|
|
|
|
06-03-2011
|
#208
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
Thank you, its nice to see my car making other people feel good because this car is stress and sometimes I don't think I can motivate myself anymore but somehow I keep truckin.
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
|
06-03-2011
|
#209
|
|
Finally Tuned...
Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
|
Re: GsXtUrBo98's 2G project thread
Quote:
Originally Posted by goodhart
Car that runs nicely > Pretty engine bay IMO
|
X2 now put it nack on there and quit being a typical dsm'r. I had mine on and I never once had anyone say anything about it being there and you can barely see it.
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**
Amsoil Dealer
|
|
|
|
|
06-03-2011
|
#210
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
I don't care that its there.. If it becomes an issue down the road it wouldnt take much to put it back in.. JEEZ you would think this is your car...
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
|
06-03-2011
|
#211
|
|
Finally Tuned...
Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
|
Re: GsXtUrBo98's 2G project thread
 I want a ride in it so get it on the road!
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**
Amsoil Dealer
|
|
|
|
|
06-05-2011
|
#212
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
I installed the head lights, tail lights, and reverse lights today. Also, put on the exhaust that I dont want to run but need an exhaust on there for the time being, then I took the car for a little ride around the block and the clutch needs adjusting pretty bad, It inguages almost at the floor.... Anyways I'll get some pics up soon and maybe a video? we'll see.
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
|
06-05-2011
|
#213
|
Join Date: May 2005
Location: Linwood, MN
Drives: You crazy!
Posts: 2,354
|
Re: GsXtUrBo98's 2G project thread
good work! Why'd you call though?
|
|
|
|
|
06-05-2011
|
#214
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
 I'm having clutch engagement issues and have been putsing with it for hours and have no idea what the hell to do... I can rev it up and my car will move with the clutch at the floor.. I watched a jacks video on how to adjust it but no matter what I do it doesn't change. I'm at a loss......
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
|
06-05-2011
|
#215
|
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: GsXtUrBo98's 2G project thread
Did you torque the pressure plate properly? which clutch is it? standard single discs will drag at somewhere above 7k rpm usually no matter what, is that what you're experiencing?
|
|
|
|
|
06-05-2011
|
#216
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
Its a ACT2900 and it was all torqued to spec, its engageing at the floor and yes it is draging at high rpms... jacks says you shouldn't have any drag though..... I'm just frustrated to my limit right now...
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
|
06-05-2011
|
#217
|
|
Finally Tuned...
Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
|
Re: GsXtUrBo98's 2G project thread
Come on man its a DSM you have to have ALOT of patients otherwise sell it because they will do that to you. You do have that longer rod in the slave cylinder right?
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**
Amsoil Dealer
|
|
|
|
|
06-05-2011
|
#218
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
I have the longer rod in there. I won't give up on it but its not helping that I wanted this thing done by brainerd.. if it keeps going this way I won't be making it out there..
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
|
06-05-2011
|
#219
|
Join Date: Jan 2010
Location: Minnesota
Drives: 97 Eclipse GST spyder(Project car), 95 Corolla(DD), 91 MR2 turbo(Fun car)
Posts: 751
|
Re: GsXtUrBo98's 2G project thread
Did you properly bleed the clutch?
|
|
|
|
|
06-05-2011
|
#220
|
Join Date: Nov 2007
Location: lino lakes
Drives: 98 GSX, 04 is300
Posts: 1,856
|
Re: GsXtUrBo98's 2G project thread
Yes, twice
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
Linear Mode
