MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-20-2011   #4
Perkul8r
 
Perkul8r's Avatar
 

Join Date: May 2010
Location: Glendive, Montana
Drives: 91 GVR4
Posts: 585
Re: Stalling under load.

Ok so far I have been able to change the plugs and wires. Haven't gotten a chance to pull down the ECU and check it out.

Also, the car has only done the hesitation like once or twice since I changed plug wires.

Now the other thing going on is that when it comes down to an idle the oil light will flash on the dash. But the car is not low on oil. Its actually a touch over full. So not sure whats going on there.

But to help out I did find a cheap logging setup. Its just a Palm data logger. But it will work and help read my DTC's..
__________________
DSM....Because broken timing belts, cheap interior, transfer case leakage, and crankwalk is to weed out the weak.
Perkul8r is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:51 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.