Instead of the banjo bolt, use a 12x1.25 to -6 AN adapter. The 12mm threads into the top of the fuel filter, the -6 on the other side will go to the feed line to the rail. Then you just need the -6 to fuel rail adapter. BTW, I just found one in my box of parts after moving (the -6 line and rail adapter), if you want it. It's off my old talon, you would just need to buy the 12mm to -6 adapter from somewhere like summit.
http://www.summitracing.com/parts/EA...5&autoview=sku
Hybrid Mode
