MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Tuning/Electrical

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-13-2010   #11
CarPsyco84
 
CarPsyco84's Avatar
 

Join Date: Jan 2005
Location: Coon Rapids
Drives: 07' Z06, 16' Beta 300RR
Posts: 804
Re: e85 question

Your most likely going to hit fuel cut with those injectors... but 21psi might be doable... being that your running e85 the timing isn't so bad, its still a little high. I ran 30psi with a SAFC and 1000cc pte's with no knock, but I also had a FMIC and I retarded the stock timing 3 degrees... Defiantly not ideal but it did work.

I think that 780cc injectors are on the small side for a e16g, while you might be okay at 21psi, its best to get some sort of setup that you can monitor the knock so you know for sure. The chipped cars I see usually use the stock boost gauge to display knock, which is nice... otherwise get a pocket logger if your really cheap.
__________________
-When in doubt, Moar RPM.
CarPsyco84 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.