Welding tabletop

Kevin 1G Drummer · 06-23-2010

1/4 inch will be way thicker than you need. 1/8 inch will be plenty thick if you have it screwed to a piece of plywood. Discount Steel will probably be your best bet.

rose0529 · 06-23-2010

Quote:

Originally Posted by Kevin 1G Drummer

1/4 inch will be way thicker than you need. 1/8 inch will be plenty thick if you have it screwed to a piece of plywood. Discount Steel will probably be your best bet.

+1.. my exact thoughts