|
Re: Removing Valve Cover Baffles?
Do what I did. Weld the fittings to your valve cover, in the factory places. Then, find a drill bit to the size of the hole in the fitting, and after it's welded, drill that hole out. Clean the valve cover out really well, and then powdercoat/install. This is how mine was done, and NO issues. Baffles never where touched.
__________________
Black 1GB Mafia #1
744AWHP/526TQ-Shootout mode
639.6AWHP/452TQ-DB's dyno
I wanna go fast.
|
Hybrid Mode
