2.4 n/t?

[Andrew7dg]

the 2.4 with a DOHC is a common build. There is a lot of info around for how to do that.

short story, if you are using the 6 bolt 4g64 block, you would need aftermarket pistons that would lower the compression. if you would use the stock pistons you would get a 12:1 compression ratio.

You would also need a DOHC 4g64 timing belt and cam gears.

[1QUICK4]

Originally Posted by Andrew7dg

. if you would use the stock pistons you would get a 12:1 compression ratio.

Hmmm, with a little E85 that sounds like an easy way to hang with those pesky Hondas in the "stock" class short track racing.