The 4 pins for the trunk lid and installed and the heights set. The 2 in the back fit nice under the wing and its easy to slide on and off for filling up, battery or fuel pump service or filling the nitrous bottle.
Now with the trunk lid off the break lights and license plate area are mounted to the chassis and just the trunk lid and wing come off. I have a little more lining up and finish work back here.
Here is the trunk lid down to the basics. I also added 2 braces on the rear deck lid. Also the front hood pin locations are fabricated, now I just need a hood to install.
Here are the tires I want to run on all 4 corners. Now I just need to find a wheel to fit a 4 x 114.3 bolt patter and be 15" x 8" wide. Enkei RPF1 or similar.
~John
__________________
Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.
Now I just need to find a wheel to fit a 4 x 114.3 bolt pattern....
~John
I converted my GVR4 to standard from a donor DSM in the junk yard....its well worth it because the wheel options are much better....also I own only one set of 4 lug wheels.
Hybrid Mode
