Wanted: Someone with transmission experience

santa · 03-16-2010

The first one with the grinding 3/4 has a broken shift fork. That's very common, I have broken my fair share of those. The 2nd one... If the center diff is welded the viscous has no purpous besides holding the transsfercase output shaft in place with a small check ball. I think I actually worked on that transmission before. I remember that it needed to be removed to further diag what was wrong with it.

**goodhart** · 03-16-2010

Quote:

Originally Posted by santa

The 2nd one... If the center diff is welded the viscous has no purpose besides holding the transfer case output shaft in place with a small check ball. I think I actually worked on that transmission before. I remember that it needed to be removed to further diag what was wrong with it.

If you were working at MAP, then yes. They wanted to charge me extra to further diagnose what was supposed to be a perfectly working tranny in the first place, so I said the hell with it and just replaced it.

I just want to get these transmissions working again so I can sell them and get a built one.

If you are interested in helping out, send me a PM

santa · 03-16-2010

Quote:

Originally Posted by goodhart

If you were working at MAP, then yes. They wanted to charge me extra to further diagnose what was supposed to be a perfectly working tranny in the first place, so I said the hell with it and just replaced it.

I just want to get these transmissions working again so I can sell them and get a built one.

If you are interested in helping out, send me a PM

Yeah, I was the one who took it apart to figure it out. It needed to come all the way out to figure out what actually happen to it. I'd like to help out! PM sent!