Make sure the nut securing the pedal assembly to the master isn't loose. after you push the clutch in and let it out, grab the pedal and pull up. If there is any freeplay it is most likely one of your problems.
It's common as hell on 1G's. If it's loose for two long it will round the keyway off the pedal assembly.
Taboo used to have a right up about removing it and welding it but if you pull the pedal up and tighten the shit out of it, it will be good for a long time.
Make sure there isn't any slack before you adjust the rod
Quote:
Originally Posted by 123abc
It's either a 12 or a 10. Loosen up the lock nut and on a good mc you should be able to twist the rod with your fingers.
|
Yep, if it wont move easily just wiggle the pedal and it should spin with ease
Hybrid Mode
