motor loads when clutch pedal pressed

[CarPsyco84]

This is something new, that I haven't seen before... The engine becomes loaded, like you just turned on 8 head lamps, when you press the clutch pedal down... Doesn't do it when the engines cold, but the warmer the engine is, the worse it gets... I had to raise the idle or it would die when you press the clutch pedal down... I'm thinking/hopeing throw out bering, and not some motor issue, makes no audible noises either... I'm baffled

[b00stcreep21]

Does it try and creep foreward if it's in gear, clutch in, and no brake?

[Shane@DBPerformance]

Crankwalk

[Goat Blower]

I think Shane's right. Have someone push on the clutch pedal while you look down the timing belt side at the harmonic balancer. You'll be able to see the pulley move in and out.

[Super Bleeder!!]

Yea thats usually a crankwalk symptom

[GsXtUrBo98]

but he has a 6 bolt???

[1QUICK4]

It can still happen.

[311evo]

Originally Posted by ecoli

Crankwalk

oh noes. GL on finding the problem.

not to be another bearer of bad news, but my eclipse was doing that before it took a walk.

[CarPsyco84]

thats what I was afraid of... but my crank should be fine, its just the thrust bering that must be worn out then. unlike the 2g's that have bad cranks

[CarPsyco84]

yep.... its walking... dunno what the end play limit is, I'm guessing a good .020" or more when you press the clutch...

[Shane@DBPerformance]

I have seen 6-bolts with destroyed cranks and blocks from crankwalk.

[TkrPerformance]

seen that also it happed to one of craigs blocks and cranks,because crank shaft supply was to polish the crank and they cut it and did not tell us. the crank destroyed the block and oil pump in a month. they ended up buying a new mistu block and crank for us for there fuck up

[CarPsyco84]

well 6 bolt motor guys should take note... you are not immune to crank walk. I didn't bother to measure the walk in this but its at least .020"

[NOT THE BLUE LAMPSHADE]

walkathon for breast cancer

[dsm9sec]

Originally Posted by CarPsyco84

well 6 bolt motor guys should take note... you are not immune to crank walk. I didn't bother to measure the walk in this but its at least .020"

If you build it right there's very little chance.