Cookout is close! Any major plans?

[Andrew7dg]

Drop the car 2" with sportlines and kyb agx's

Put in energy suspension bushings (3 weeks to order and ontop of that FedEx needs help...)

change the rear end to a 4 bolt

POR 15 all the pieces that make up the rear

Clean up the wiring from the MS2 system and make it looks nice(yes, ms2 works!!) Tune it a little...

find a boost gauge to go over 20psi

Found a sun roof with a detachable switch from U pull, install that

Clean, wax, detail, drive, repeat...

Almost there...

Last year didn't make it but this year will be there!!

[eagle talon guy]

Originally Posted by Andrew7dg

Drop the car 2" with sportlines and kyb agx's

Put in energy suspension bushings (3 weeks to order and ontop of that FedEx needs help...)

change the rear end to a 4 bolt

POR 15 all the pieces that make up the rear

Clean up the wiring from the MS2 system and make it looks nice(yes, ms2 works!!) Tune it a little...

find a boost gauge to go over 20psi

Found a sun roof with a detachable switch from U pull, install that

Clean, wax, detail, drive, repeat...

Almost there...

Last year didn't make it but this year will be there!!

Anything else?!

[Andrew7dg]

Originally Posted by eagle talon guy

Anything else?!

Switch to E85?

[Andrew7dg]

Originally Posted by Andrew7dg

Drop the car 2" with sportlines and kyb agx's

Put in energy suspension bushings (3 weeks to order and ontop of that FedEx needs help...)

change the rear end to a 4 bolt

POR 15 all the pieces that make up the rear

Clean up the wiring from the MS2 system and make it looks nice(yes, ms2 works!!) Tune it a little...

find a boost gauge to go over 20psi

Found a sun roof with a detachable switch from U pull, install that

Clean, wax, detail, drive, repeat...

Almost there...

Last year didn't make it but this year will be there!!

Energy bushings are in.
4 bolt swap is complete
Cleaned up the whole rear suspension with POR 15 (feel like I should try to put a mirror down to show people what it looks like)

Finished painting the rear brakes, need to install
Then car can sit on 4 wheels

need alignment because I pulled everything apart and now need readjustment

ECU wiring is almost cleaned up and found a good place for my new ECU (sits in the cup holder or center console)

Had all day to work on it. I am going to be close on making it this year.

[Andrew7dg]

Originally Posted by Andrew7dg

Energy bushings are in.
4 bolt swap is complete
Cleaned up the whole rear suspension with POR 15 (feel like I should try to put a mirror down to show people what it looks like)

Finished painting the rear brakes, need to install
Then car can sit on 4 wheels

need alignment because I pulled everything apart and now need readjustment

ECU wiring is almost cleaned up and found a good place for my new ECU (sits in the cup holder or center console)

Had all day to work on it. I am going to be close on making it this year.

Car starts, runs, and moves! see you guys at the cook out!

My interior is all ripped apart I don't know if I should put it back together.
However I do have a roll bar that could be installed.
Should I put that in before the cookout?