1996 Eagle Talon TSi AWD Project

[asshanson]

I wouldn't go with the FP3 (or FP4) cams, they're made for a stroker. The FP2x would be a good choice if you've got heavy duty dual valve springs, but you can't rev very high with them.

I recently got the FP4R cams, as well as a few others on this board, I really like them. With good single springs like supertech you could rev to around 8500 safely.

Just a few thoughts if you're set on FP cams.

[Street Ill Eagle]

Originally Posted by slowboy

I wouldn't go with the FP3 (or FP4) cams, they're made for a stroker. The FP2x would be a good choice if you've got heavy duty dual valve springs, but you can't rev very high with them.

I recently got the FP4R cams, as well as a few others on this board, I really like them. With good single springs like supertech you could rev to around 8500 safely.

Just a few thoughts if you're set on FP cams.

Thanks. I'm getting the Supertech high tension dual springs. We're talking with Supertech to see the best set up they recommend.

Ok here are some pics as we were putting the turbo in.