t04b v-trim question

[iceminion]

will the stock banjo bolt oil feed line work? I do not believe so.

Just buy the SS line.

Make sure to attach the SS line to the oil filter housing, you will get greater oil pressure to the turbo, which is better. (i think)

[4seasons69]

Originally Posted by iceminion

will the stock banjo bolt oil feed line work? I do not believe so.

Just buy the SS line.

Make sure to attach the SS line to the oil filter housing, you will get greater oil pressure to the turbo, which is better. (i think)

I know the oil feed line won't work and I'm getting an ss one. I was asking about the oil return line. If that would work

[b00stcreep21]

Originally Posted by iceminion

will the stock banjo bolt oil feed line work? I do not believe so.

Just buy the SS line.

Make sure to attach the SS line to the oil filter housing, you will get greater oil pressure to the turbo, which is better. (i think)

Too much oil pressure= blowing oil past turbo seals. You won't have too much pressure from the filter housing on a journal bearing, but ball bearing you need to feed it off the head (less pressure)

[munchgsx]

No the stock line will not work. Get a SS push lock from MAP or somethin.

[4seasons69]

thanks for the help. i'll pick up an ss line