Rough idle and no vacume?

[Pushit2.0]

I would have someone else who knows what they are looking at check your timing marks and then use a timing light to set the base timing. Also 94talon with a CAS sensor on a mitsu the ignition timing will drift as much as 1 deg advanced or retard from what you set it to, just from the play in the timing belt and from the CAS to cam connection.

~John

[Gravy]

After doing some thinking, and tring to put everything together... timing must be off. I'll have to check it over the week/end and double check. I made sure it was on at least 4 times putting it on, and i guess i'm blind as hell. I had 150-150-125-150 for compresion before the HG. Now i run 130-130-125-130. So, the car's got a new HG and still needs a leak down test. Gota love DSM's.

I think my Exauhst cam is off, but i'll have to find out in a little while. Try toying with the car shortly.

Gravy

[94talonawd]

Originally Posted by Gravy

After doing some thinking, and tring to put everything together... timing must be off. I'll have to check it over the week/end and double check. I made sure it was on at least 4 times putting it on, and i guess i'm blind as hell. I had 150-150-125-150 for compresion before the HG. Now i run 130-130-125-130. So, the car's got a new HG and still needs a leak down test. Gota love DSM's.

I think my Exauhst cam is off, but i'll have to find out in a little while. Try toying with the car shortly.

Gravy

Early Merry Christmas!