Turbo Manifold issues

[Gravy]

i'll double check all the lines, but when Febo and I ran through it everyting was hooked up, and when you gunned the gas the actuator arm would pull. And it's hooked up. So unless the flaper welded it's self shut inside, it should be working.

I'll give it another one through on the hoses and try and find out what's up.

Going to try and port out the exauhst this weekend. May have some free time.

[Gravy]

Bumping, next week i may be doing the radiator swap, is it possible to take the exauhst side off the turbo while still leaving the rest of the turbo hooked up? I'd like to make the job as easy as possible, but what must be done will.

Porting will take me a good little while, so anything else anyone would recomend on a $0.00 dollar budget to do while i'm working on the exauhst?