Quote:
|
Originally Posted by jturg
So i can use 6 bolt 2.0 rods in my 6 bolt 2.4 and dont have to use offset
wirst pins/
|
Wiseco off sets the wrist pin to help with piston slap on warm up, Ross and J&E pistons have the wrist pin in the middle of the piston. So its a good idea to install the off set wrist pin piston the right way (arrow or dot to the front of the motor, i e timing belt side). But having the pin moved up or down in the piston to account for a longer/shorter rod, or longer/shorter stroke is not needed as the 2.4 pistons are over the shelf now. Installing a 2.4 crank in a 2.0 block would need the wrist pin moved up in the piston to account for the shorter deck on the 2.0 block.
~John
Hybrid Mode
