MitsuStyle Fall Cruise 2013 - Oct 5-6th - Rochester, MN - Page 9

simulatedwood · 10-04-2013

Quote:

Originally Posted by Tachyon

Can I get a side bet in? Also, Vegas posted odds of mine making it to the starting grid....

Makes to the starting grid with all parts accounted for? I will take that bet!

Actually scratch that bet, I know you will make it, but really the question is whether is will be leaking oil, coolant, or some combination of both?

bramagedained · 10-04-2013

Quote:

Originally Posted by simulatedwood

Makes to the starting grid with all parts accounted for? I will take that bet!

Actually scratch that bet, I know you will make it, but really the question is whether is will be leaking oil, coolant, or some combination of both?

I don't know if that's the right question either. Cam's DSM was leaking stuff on the spring cruise and made it.

**cmspaz** · 10-04-2013

Quote:

Originally Posted by bramagedained

I don't know if that's the right question either. Cam's DSM was leaking stuff on the spring cruise and made it.

It was leaking stuff on the cruise before that and made it, too.

Mark Leasure · 10-04-2013

The car is ready to go, I'm bringing a gun to a knife fight...

twack · 10-04-2013

you guys need tools or a garage to fix your car in rochester hit me up

blackrosenova400 · 10-05-2013

Ready for cruisin boostin and boozin!

**Kracka** · 10-05-2013

I'm so fucked up. I'm bringing my brother in law!

**goodhart** · 10-05-2013

Lookin good Chad! That thing needs a project thread one of these days.

I'd love to see more about your setup.

Quote:

Originally Posted by Kracka

I'm so fucked up. I'm bringing my brother in law!

WTF Fucker! I asked you if you were gonna be drinkin!

**Tachyon** · 10-05-2013

Well after 12 consecutive hours, I finally had to throw in the towel on the Talon. A combination of broken parts and lack of sleep have contributed. NBD, route is still a blast with a slower car.

See you guys tomorrow!

**Murlo26** · 10-05-2013

Be safe bitches! Also...DL, you still owe me drinks for stealing like 4 L of booE for mystery shots last cruise!

**Kracka** · 10-05-2013

It went to a good cause.

**Murlo26** · 10-05-2013

It did! For sure. Just saying

I expect booze next time!

TkrPerformance · 10-05-2013

See you all in 8 hours

**Spoolin_Turbo** · 10-05-2013

Can't wait for the mystery cooler again

blackrosenova400 · 10-05-2013

Wake up peeps

**JET** · 10-06-2013

It was a very good time! Freaking tore some shit up in the lead group, I had a blast and am extremely impressed with the 335i. Thanks for putting this together Paul! Much cooler shots and shenanigans at the hotel too

blackrosenova400 · 10-06-2013

Whos got pics??!!

Also I seem to be missing a snapon 3/8 6 inch long extension that was used during our first cruise valve cover removal. If found let me know otherwise ill live without it.

**cmspaz** · 10-06-2013

I only got a few pics from the drive back, weather wasn't too good for hanging out car windows on the way down.

**scheides** · 10-06-2013

Epic weekend as always! Thanks to everyone for coming and thanks to everyone that stopped for the troubleshooting session on the side of the road. First valve cover pull on a gravel road on a cruise? I think so! Once the car was cool and we had inspected injectors, spark plugs, and what we though thought was the entirety of the engine harness we noticed that the exhaust side mivec plug was loose....I misread the 'misfire' code I pulled off of the ECU and it was actually a PO365 "Exhaust camshaft position sensor circuit" doh! I had left the exhaust manifold heat shield off and I think it got too hot and she worked her way loose.

I had to pull the valve cover again sunday morning because the gasket had gotten kinked as I basically threw in the towel on the side of the road. That sealed things up and in true DSM fashion, one zip tie secured the plug and beaterX saw boost all the way home

**goodhart** · 10-06-2013

WTF @ Tachyon in his underwear!!