Swifty's never-ending project thread!

[Swifty1638]

I dunno why, but i am wanting to carry the black/red theme even more. MIGHT get some of these over the summer. Also, gonna bave Primo make me up some replacement decals for the kosei wheels in red.

I'm also SORTA toying with the idea of getting some work emotion cr-kai wheels in a 17x8 or 17x9 gloss black setup, and throwin those evo rotors i got on it, with some brembos. I dunno though, and frankly thats far last on my list.

-A. Swift

[turbotalon1g]

Do red wheels.

[Swifty1638]

no red wheels at all. It was an idea, as a compliment to the black.

anyway, wiring is finished. Timing is done and back together. Cams are degreed. everything is buttoned up. Intake pipe is made, just gotta coat it, and get the new filter/coupler for it.

Car won't start. We dunno why. It cranks over, but won't fire. AEM ranges from 0-24,000rpms. only thing that would effect that is the aem, CAS, etc. Wiring for the CAS was never touched. We went over the wiring for the MSD, the COP setup, the ecu pinouts, etc. NOTHING seems outta place. John just left, i'm tired, and will be at work tomorrow. Disappointed. Wish I had better news for those who cared. Right now, the cards just aren't in my favor. Hopefully soon, we can get this figured out.

-A. Swift

[311evo]

Lame guy, hopefully you get it all buttoned up soon.

[FattyBoomBatty]

Got spark and fuel? If you have both and it won't start, the timing is probably off. Mine started without setting the base timing but it was "lined up" pretty well to begin with. More fuel helped though.

[niterydr]

With the adjustment of the cam, pending how far off they were, the base timing could have been thrown off.

[tehehodi]

car doesnt fire.......and missed out on some cute as girls....no luck for you lately!

[A//// Guy]

Check for spark, im assuming fuel is there.. Im sure you will get it figured out!

[Swifty1638]

it cranks over, but the RPM gauge on the stock tach doesn't work. The RPM's through the AEM is going completely nuts! Something somewhere is messing up, and not telling the correct thing to the AEM which will then tell the MSD and etc what to do.

-A. Swift

[Pushit2.0]

We only advanced the intake cam 4 deg. It is not Stat Syncing so the AEM does not know the engine is cranking over, so we will re load the map and update the firm ware. The wiring for the CAS and all the grounds check out, but I will bring a CAS and my EMS just to be safe.

~John

[Swifty1638]

When you coming over to hopefully help wrap this bish up!?

[tehehodi]

congrats! you got it running!!!!!!


now get a tune

[brando]

min cant wait to see this bish out and about

[viridionplague]

woot woot

[Swifty1638]

fucker spoiled it!! I made a short 30 sec video but the sound just SUCKS!! So, if I had a camera i could record a better vid with, i would. I'll just say everything now works after finding some wires shorting out and whatnot. Issue ended up being that the TDC wire on the CAS was grounded out somewhere, and causeing the AEM to go ape shit! So, eliminate that issue, and wow..it runs! idle is now set, and I gotta find the manual for the FJO to hook up 1 more wire for the wideband 02 to monitor on the AEM, and i'll be in business! Wow, it feels good! BIG thanks to John for sticking it out with me, even till 3am, to figure it out!

-A. Swift

[niterydr]

Originally Posted by Swifty1638

fucker spoiled it!! I made a short 30 sec video but the sound just SUCKS!! So, if I had a camera i could record a better vid with, i would. I'll just say everything now works after finding some wires shorting out and whatnot. Issue ended up being that the TDC wire on the CAS was grounded out somewhere, and causeing the AEM to go ape shit! So, eliminate that issue, and wow..it runs! idle is now set, and I gotta find the manual for the FJO to hook up 1 more wire for the wideband 02 to monitor on the AEM, and i'll be in business! Wow, it feels good! BIG thanks to John for sticking it out with me, even till 3am, to figure it out!

-A. Swift

Grounding wires and CAS sensor problems? Hmm...
Glad you guys figured it out. That was a late evening for you guys. I was sleeping by 11pm last night.

[C3L1CA]

Congrats, can't wait to see some numbers out of it!

[Febo]

Woot!!! Way to go swift!

[hippiekiller]

Congrats!

[asshanson]

Congrats! Now make more than 509 and spool early! Haha, that would be awesome if you DD this for part of the summer, cant wait to see it!