Back to 4 Cylinders

[x1genx]

your cf altezzas arrived in the mail this morning. i had to sign for them. i started molding the side skirts today..should be done by the time you get off of work.

[At-Least-It's-An-Evo]

ruh roh.

[FattyBoomBatty]

Pic is so small. Like your wiener.

[sleepydsm]

hehehehe

[Shane@DBPerformance]

Cher + FWD should be interesting.

[At-Least-It's-An-Evo]

Originally Posted by Shane@DBPerformance

Cher + FWD should be interesting.

= wall.

[mike55112]

Drive it, have fun, park it at the mall, collect insurance money, buy an evo. Thats what I would do.

[URV8SUX]

First pull cher does on the way home from getting it tuned and it is spinning the tires 1st-5th it will be for sale!

Originally Posted by mike55112

Drive it, have fun, park it at the mall, collect insurance money, buy an evo. Thats what I would do.

[sleepydsm]

Originally Posted by URV8SUX

First pull cher does on the way home from getting it tuned and it is spinning the tires 1st-5th it will be for sale!

Bahahahahaha

[MustGoFaster]

Cher, for a project thread this has been full of laughs. Keep up the good work.

[At-Least-It's-An-Evo]

Stickers + more stickers = 500whp.

[b00sted_spyder]

K20 turbo. Looks like fun.

[turbotalon1g]

Should of modded the one on the right.

[At-Least-It's-An-Evo]

K, here's the serious:

Latest purchase is a 1998 DC2 Integra with a K20a2 swapped in already. I didn't know anything about K20's til I started reading up on k20a.org and realized they could make a good amount of power on completely stock longblocks.

I ended up buyin it, and all it needed/needs is a gas tank, a windshield put back on, and of course a turbo.

Towed it home, next to my SC300.


Needed the inteiror put back together as it had a cage in it, and it was taken out to cut the cage out (previous owner did it).


Here was the engine bay shot as I got it - wire tucked.


It came with a few nice things:






...and some more stuff.

Then the windshield went on! (not sure if i'm keeping the headlights yellow)


and on to the more important stuff.

As soon as I got it, I started buying turbo parts as the whole intention was to turbo it.

Skunk2 tensioner, turbo, PTE 6262, 1000cc injectors, Tial 44 w /a 13 lb spring, walbro-modded, HKS bov...



Then the manifold, which I'm having MAPerformance make, and it will be in production soon!

and this is the progress so far!

rigged up:


manifold tacked together on the jig:


manifold mock-mounted on car:




and that's the progress so far. I picked the car up about a month ago and plan on having it all tuned and making a hopeful 4-500 easy whp, (depending if the clutch slips or not), tuned by Shane, within two weeks if all goes well. =)

If I could low offset it and dump it, I would JUST so all the haters could hate, lol. but I can't... oil pan is already 2-3 inches from the ground.

[goodhart]

That manifold made me JIMP. Glad to see you actually posted stuff now Looks like it should be a fun car!

[LingLing]

Those K20's are a great platform. Looks like it'll be highway monster!

[turbotalon1g]

Nice, i'm shocked you didn't go with a 67, but I know these newer turbos make big power.

Good luck, saw the car yesterday looks great. (I wanted to take your turbo, lol and wheels)

[At-Least-It's-An-Evo]

Originally Posted by turbotalon1g

Nice, i'm shocked you didn't go with a 67

Yea, this turbo will make more than the bottom end or the tranny can handle (or the clutch), so it's ok. I'm trying to keep it "cheap" as we all know it might just get stolen in the end....

[TalonFiero]

Put a skid plate on that oil pan. 2-3" of clearance is very scary in this state, almost a guaranteed problem waiting to happen.

Looks nice!

[Kevin 1G Drummer]

Looks like my old wastegate will be going to good use! Too bad it's not being used on the SC though... haha