Finally getting stuff done on our cars

[EVOMR05]

even in the office it was load...had to tell a customer to hold on cuz couldn't here him on the phone!

[Shane@DBPerformance]

By unload, do you mean the clutch slipping? What was the boost at?

Why does it need break-in? I wouldn't think he would have an organic disc in there.

[niterydr]

Originally Posted by ecoli

By unload, do you mean the clutch slipping? What was the boost at?

Why does it need break-in? I wouldn't think he would have an organic disc in there.

Its a 6 puck FE disk, it might wear in a little.

Boost was at 36, but spikes higher in the beginning.

[Pushit2.0]

The track will be a good place to finish tune the car, and if the clutch still does not work I will find a 3200lb PP and if that does not work then I save up for a Tiltan triple disk or something. Yes we ment the clutch is slipping, the tires are not spinning on the dyno atleast. It nice to shift and be right back on peek torque though, this should be a fun car on slicks at the track. I thought about going to the track sunday, but I do not need to see what my track time would be while doing a few 360s.

~John

[FattyBoomBatty]

sweet

[98gstaherns]

wowza. Very nice work yet again!

[Pushit2.0]

Who wants to loan me some tires for the track this weekend?

~John

[carltalon]

Glad to hear is finally running

Originally Posted by Pushit2.0

Who wants to loan me some tires for the track this weekend?

~John

I got 2 slicks if you can find someone to lend you another set that matches. I think there 23 inch but Id have to check.

[Goat Blower]

You missed out, I sold an ACT 3200 PP for $75 not too long ago.

[Pushit2.0]

I want to see if its a problem on the track first, SBC also sujested the disk will have to wear itself into the flywheel and PP, this might take a little time, we will see.

~John

[Shane@DBPerformance]

Do they have some puck disc that requires no breakin at all that you can just throw in? I find it strange that is slipping with the torque that your car is making, my wifes old 2600 holds over 400ft-lbs at the wheels on the dyno without slipping.

[Speedfreak]

My 2600 has held 490wtq(on my Dynojet) and at the track. It did smell a bit after each run at Cedar falls, but no obvious slipping down the track. The same clutch is still in the car two years later.

[FattyBoomBatty]

Just air down the ones you have. Light 'em up if you can, bitches.

[Pushit2.0]

I was 100% sure I am not going but just thought I would see who was planning for it.

~John

[scheides]

Ya, why not just turn the boost down as low as it will go and go make some shakedown runs? Shakedown runs, not 9 sec passes, shakedown runs!

[Pushit2.0]

It makes 520awhp at 26psi, as low as it will go with out taking the WGs off, Also I do not have the time or money to get the car ready and down there, you all have seen how track ready the car is.

~John

[niterydr]

recent discussions purged, please take it to off topic guys.

[Blitzkid]

So I got a ride the other day. Oh my god I almost shit myself. The road in front of the shop has never seemed shorter.

John..."its not that bad, just brace your feet against the firewall.."

Thanks for showing me how a GT42 is supposed to be used.

[SlowWhite]

So any video's yet?

[Pushit2.0]

Working on how to get them off the Mini DV and on to the intronets.

~John