02-09-2010
|
#1
|
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: 1991 talon 500 hp project
Nice list. Only comments I have are why did you need a new Crank? Also in my opinion you probably could have gotten away with stock main hardware and saved some money by not getting the ARP's. But to each their own, good luck man! The more fast purple 1g's around, the better  |
|
|
|
02-09-2010
|
#2
|
|
IS Broken :-/
Join Date: May 2009
Location: crookdale
Drives: 91 Talon awd /90 laser rsT
Posts: 431
|
Re: 1991 talon 500 hp project
Quote:
Originally Posted by Halon
Nice list. Only comments I have are why did you need a new Crank? Also in my opinion you probably could have gotten away with stock main hardware and saved some money by not getting the ARP's. But to each their own, good luck man! The more fast purple 1g's around, the better |
i needed it cause i think mine is thrashed cause its knocking map sold me one for $ 280 +( its going to need a polish )
the arp's i thought would make my engine stronger and safer.yeah i could have saved some money on a few things but i have the worst luck when it comes to engines and i just dont want to cheap out on some parts and be broken down some where.
__________________
1991 Eagle Talon awd
2.0 fully built lower-end
wiseco/eagle rods / crank 9:0:1
dsmlink v.2.5 fp race mani 880cc injectors w255
hx35/bep/maperformance o2 with dump
+more mods to list
Last edited by way2fastalon; 02-09-2010 at 11:52 PM..
|
|
|
|
|
02-09-2010
|
#3
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: 1991 talon 500 hp project
I havent SEEN any around? lol
Sounds like quite a list you got there, good luck
|
|
|
|
|
02-09-2010
|
#4
|
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: 1991 talon 500 hp project
I hear ya. I'm still on stock main hardware so that's why I think you'd be ok too. But if it's worth it to you to get em, then more power to ya! Better safe then sorry isn't a bad mindset.
|
|
|
|
|
02-10-2010
|
#5
|
Join Date: Nov 2005
Location: Cottage Grove
Drives: Silver '02 IS300, Blue '06 Suzuki SV1000
Posts: 5,293
|
Re: 1991 talon 500 hp project
$280 for a 6 bolt 2.0 crank that needs a polish?? Are they getting hard to find or something? I got one from them about 2 and a half years ago for $75.
__________________
'02 Lexus IS300
'06 Suzuki SV1000: Back on the road and ripping hard as ever!
|
|
|
|
|
02-10-2010
|
#6
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: 1991 talon 500 hp project
Yea damn...that's a hefty pricetag for a stock crank.
|
|
|
|
|
02-10-2010
|
#7
|
Join Date: Jan 2010
Location: sioux falls
Drives: 90 gst
Posts: 274
|
Re: 1991 talon 500 hp project
i would have sold you a stock crank for $50
__________________
99 Jaguar XJ8 (cruiser)
96 Civic Ex (sold)
90 Eclipse GS-T (sold)
90 Talon Tsi Awd (sold)
97 Talon Esi (sold)
93 240sx S13 (sold)
88 Rx7 Fc (sold)
|
|
|
|
|
02-10-2010
|
#8
|
|
IS Broken :-/
Join Date: May 2009
Location: crookdale
Drives: 91 Talon awd /90 laser rsT
Posts: 431
|
Re: 1991 talon 500 hp project
here is my kit and parts i have got so far
__________________
1991 Eagle Talon awd
2.0 fully built lower-end
wiseco/eagle rods / crank 9:0:1
dsmlink v.2.5 fp race mani 880cc injectors w255
hx35/bep/maperformance o2 with dump
+more mods to list
|
|
|
|
|
02-10-2010
|
#9
|
|
Reynolds number user
Join Date: Oct 2003
Location: grove/tempe
Posts: 3,553
|
Re: 1991 talon 500 hp project
Dont you need to line hone when you use arp main studs?
__________________
07 Ducati Monster S4R
00 honda elite 50 (64 mph braH!)
05 malaguti F15
04 E55 AMG
|
|
|
|
|
02-10-2010
|
#10
|
|
formerly ecoli
Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
|
Re: 1991 talon 500 hp project
Quote:
Originally Posted by Super Bleeder!!
Dont you need to line hone when you use arp main studs?
|
Maybe, maybe not, depends on your exact block. ARP mains aren't needed for most builds, but they are probably cheaper than getting a new stock set of main bolts for the non-reusable ones on the 7-bolts and Evos. I would do some ARP L19 or A1 H11 headstuds before even doing rods/pistons. The heads usually start lifting before you even reach the limits of the stock rods/pistons in a 6-bolt motor. And normal ARP head studs are next to worthless over the stock bolts in DSMs/Evos. |
|
|
|
|
02-10-2010
|
#11
|
Join Date: Sep 2006
Location: new brighton
Drives: 04 evo
Posts: 1,212
|
Re: 1991 talon 500 hp project
Quote:
Originally Posted by ecoli
Maybe, maybe not, depends on your exact block. ARP mains aren't needed for most builds, but they are probably cheaper than getting a new stock set of main bolts for the non-reusable ones on the 7-bolts and Evos. I would do some ARP L19 or A1 H11 headstuds before even doing rods/pistons. The heads usually start lifting before you even reach the limits of the stock rods/pistons in a 6-bolt motor. And normal ARP head studs are next to worthless over the stock bolts in DSMs/Evos.
|
Thats true, my last set of arp's stretched really bad and caused my cometic HG to split on cylinder number 1. I'm planning on getting the L19's this summer.
__________________
03 as evo-sold
04 bby ssl-sold
05 ww mr-sold
03 tb evo- current
|
|
|
|
|
02-10-2010
|
#12
|
|
IS Broken :-/
Join Date: May 2009
Location: crookdale
Drives: 91 Talon awd /90 laser rsT
Posts: 431
|
Re: 1991 talon 500 hp project
i have to upgrade my head studs ? i just got these. haven't even seen 300 mi or even 20 psi of boost .
__________________
1991 Eagle Talon awd
2.0 fully built lower-end
wiseco/eagle rods / crank 9:0:1
dsmlink v.2.5 fp race mani 880cc injectors w255
hx35/bep/maperformance o2 with dump
+more mods to list
|
|
|
|
|
02-10-2010
|
#13
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: 1991 talon 500 hp project
^Thats what I have heard.
|
|
|
|
|
02-10-2010
|
#14
|
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: 1991 talon 500 hp project
If you plan on running the boost neccessary to make 500hp on DB's dyno, L19's would probably be a worthwhile investment.
|
|
|
|
|
02-11-2010
|
#15
|
|
IS Broken :-/
Join Date: May 2009
Location: crookdale
Drives: 91 Talon awd /90 laser rsT
Posts: 431
|
Re: 1991 talon 500 hp project
and i thought i was done spending money
__________________
1991 Eagle Talon awd
2.0 fully built lower-end
wiseco/eagle rods / crank 9:0:1
dsmlink v.2.5 fp race mani 880cc injectors w255
hx35/bep/maperformance o2 with dump
+more mods to list
|
|
|
|
|
02-11-2010
|
#16
|
|
is Nashty
Join Date: Oct 2007
Location: Stillwater
Drives: Cyborg from Japan
Posts: 2,080
|
Re: 1991 talon 500 hp project
There is a huge thread on dsmtalk talking about how shitty the standard ARP headstuds are. Stock 6bolt head "bolts" are actually stronger than the standard ARP's.
__________________
-1990 Mitsubishi Cyborg 4WD-
|
|
|
|
|
02-11-2010
|
#17
|
|
IS Broken :-/
Join Date: May 2009
Location: crookdale
Drives: 91 Talon awd /90 laser rsT
Posts: 431
|
Re: 1991 talon 500 hp project
 dammit  anyone want to sell me some L19s
__________________
1991 Eagle Talon awd
2.0 fully built lower-end
wiseco/eagle rods / crank 9:0:1
dsmlink v.2.5 fp race mani 880cc injectors w255
hx35/bep/maperformance o2 with dump
+more mods to list
|
|
|
|
|
02-11-2010
|
#18
|
Join Date: Oct 2003
Location: edward lake
Drives: toaster
Posts: 6,431
|
Re: 1991 talon 500 hp project
now that you know to talk to craig at oreilly's and use are mitsustyle discount you could have saved a ton of cash on all the parts you just bought. with are discount there it is cheaper than any local shop
|
|
|
|
|
02-13-2010
|
#19
|
|
IS Broken :-/
Join Date: May 2009
Location: crookdale
Drives: 91 Talon awd /90 laser rsT
Posts: 431
|
Re: 1991 talon 500 hp project
so today jahaan dude stopped over here as i was pulling my engine out and might upgrade my turbo setup my e16g is not looking too good its amazing what a 100 mi will do to a turbo it has shaftplay now and dident before when it was first installed and looks like it was eating something .. not too happy about that it had an air cleaner and everything was tight dont see how that would get chewed up
so going to try to upgrade to an fp green and an evo 3 mani
__________________
1991 Eagle Talon awd
2.0 fully built lower-end
wiseco/eagle rods / crank 9:0:1
dsmlink v.2.5 fp race mani 880cc injectors w255
hx35/bep/maperformance o2 with dump
+more mods to list
|
|
|
|
|
02-13-2010
|
#20
|
|
IS Broken :-/
Join Date: May 2009
Location: crookdale
Drives: 91 Talon awd /90 laser rsT
Posts: 431
|
Re: 1991 talon 500 hp project
im having fun with my car anyone else working on there car this weekend ?
__________________
1991 Eagle Talon awd
2.0 fully built lower-end
wiseco/eagle rods / crank 9:0:1
dsmlink v.2.5 fp race mani 880cc injectors w255
hx35/bep/maperformance o2 with dump
+more mods to list
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
