MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 11-24-2003   #1
FORSFED
 

Join Date: Oct 2003
Location: White Bear Lake
Posts: 109
The problem with the car is that it severely misfires in every gear from ~4800 rpm's and up. The car does run the same fuel pressure regardless of whether there is 16-18psi of vacuum or there is 0, the fuel pressure always remains at 42psi, but it does rise to 52psi with 10lbs of boost so I know the fpr is doing its job. Then out of curiosity I unplugged the vac line on the fpr, and the fuel pressure naturally stayed at 42psi even when I stepped on it with 10lbs of boost. It ran fine up to redline like this, so I've been able to determine that there's too much fuel, and with that I planned on getting myself a regulator as john suggested and a boost controller is on the way too. Once I have these things it'll be a matter of fine tuning it so that the fuel curve is linear and the car doesn't run too righ or too lean anymore. Basically I was just looking for some input from you guys to see what your thoughts and suggestions were, that is why I keep posting what I've been doing and what has resulted.
FORSFED is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:32 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.