MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-10-2003   #5
LightningGSX
Hellbound
 

Join Date: Nov 2003
Location: St Paul
Posts: 1,390
Power is greatest when peak chamber pressures are just after TDC, when chamber volume is at its least.And higher the octane = slower the flame speed and greater delay in peak chamber pressure.So for greatest power, your octane is limited by the amount of ignition advance available or visa versa.Or for every amount of octane there is a certain amount of ignition advance needed for best power or vise versa.So after a certain point ,increasing either alone results in no power gains.And since you(or your ecu) can only advance your timing so much, there is a fine line when octane is actually bad.I personally think even c16 is too much for the average modded 4G63(no proof speculation only), but since you can't start at 100 octane and work your way up point by point I guess you have to go with what you can get.
__________________
-Nulli Secundus-
LightningGSX is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:18 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.