Engine Oil

[Febo]

Originally Posted by 311evo

Ahh okay Thanks. Is there really any advantage to using non-detergent oil? it seems like the stuff with it is healthier for the engine, and lasts longer.

There is a reason they switched to detergent oils. That reason is because non-detergent oils don't clean the sludge out of your engine. Sludge = bad, we all know this. For a modern engine I would recommend sticking with detergent oils.

Originally Posted by awd-drifter

(2) I was told not to really change from (x brand) to (x brand) because of the different "ingrediants" they use for each oil...is this true? Is that why when a few of us change to different oils, there's suddenly an issue?

This doesn't really matter. Additives are all relatively the same. Obviously some are higher quality, or are a lot more robust then others. But additives are only making up 20% of your oils composition. It's the other 80% you need to worry about, such as paraffin levels, quality of the refining, etc. Penzoil for instance is IMO the worst oil out there, especially at the conventional level. Their paraffin content is too high and leads to massive sludge.

Originally Posted by A//// Guy

Ive heard Shane say numerous times that Mobile one is too thin and ruins bearings. For normal cars that are more reserved im sure its fine, but highly modified cars have issues?

I'm in agreeance with matt on this one peter. I'd say its more the fault of not going thick enough, like uping to a 5w40 or 10w40. Altho FP did show that just by switching to Mobil 1 they managed to scorch a thrust bearing.

[Kracka]

Originally Posted by Febo

Altho FP did show that just by switching to Mobil 1 they managed to scorch a thrust bearing.

Odd how it's only FP turbos failing while all the OEM bearing turbos are holding up just fine without fancy oil feed lines and expensive oils

If you compare the wear protection specs of Mobil 1 5W-30 vs. Amsoil's you'll notice they are almost identical. The reason you see more Mobil 1 engines blowing up is because more people run it, simple statistics.

[Febo]

Originally Posted by Kracka

If you compare the wear protection specs of Mobil 1 5W-30 vs. Amsoil's you'll notice they are almost identical. The reason you see more Mobil 1 engines blowing up is because more people run it, simple statistics.

If we are comparing wear protection then Mobil 1 loses hard. Castrol Syntec has 8 times advertised wear protection, while my boys at Valvoline market 4 times the protection (supposedly upwards of 8, but they chose the lowest denominator for marketing purposes, dont wanna get sued now)

Back in the day M1 was pretty much king shit, now-a-days there are far better alternatives. M1 just has the name going for them. Makes the dumb majority of car buyers feel special.