|
Re: Evo X upgrades
The only time you would be able to get the factory capacity into an oil change is with a totally dry motor. Like a new build with a totally dry/clean oil pan, dry oil cooler, dry, oil cooler lines, etc. Most of the quick change oil places are also not going to let the oil drain for 15 mins either and try to get as much out, they will pull the plug, let it drain quick, throw the plug back in and then if they put in the factory oil system CAPACITY, then you might have too much. Too much oil can blow turbo seals, other engine seals, rod HP, etc. The turbo oil return lines are usually right at the oil level and it you unhook it with the car off, oil will drain out. With the car running the level will be a little lower and allow it to return ok. A little bit too much and the oil starts to back up into the return line.
|
Hybrid Mode
