Quote:
Originally Posted by GREASEMONKEY
Im pretty sure that the spline count on the driveshafts are all the same 90 - 94.
If you have a 1990 Tranny & X-Case and you want to switch over to a 91+ setup you will need to change your tranny and X-case but the driveshafts are the same 90-94.
I dont know if i misread your post or not but hopefully that clears up the confusion.
-Stephan
|
ok it must have been just the tc that has the different spline counts per 90/91+
thanks for clarification, so to the op, yes the driveshaft would fit.
Threaded Mode