1G Trouble shoot assistance needed

**asshanson** · 11-10-2009

Check for leaking capacitors on the ECU by taking the cover off.
It takes just a few minutes to check base timing, get a timing light and see where it's at.

If you're sure there are no vacuum leaks then check the resistance between the IAC coils, I think they should be around 40 ohms? There is a how-to on VFAQ.

**4seasons69** · 11-10-2009

as for the smoke and black liquid out the exhaust it sounds like you are burning a lot of oil. who rebuilt the engine?? just because someone rebuilt it doesn't mean they know what they are doing and did it right. a few things that can cause oil burning are the turbo, rings, valve guide seals, worn valve guides, excessive bearing clearances. just a few things to check

Chim55117 · 11-10-2009

The Keydiver is chipped for the 560's, and 3G MAS. Longblock and head from this thread:

http://www.mitsustyle.com/forums/showthread.php?t=23485