Last rock falls this year?

[Pushit2.0]

Originally Posted by turbotalon1g

I have a folding bench, am I in?

You just cant jump in the ring and think you can box. I am installing roller blade wheels and rocket boosters to my bench, the road runner does not stand a chance.

~John

[Matt D.]

Originally Posted by Swifty1638

Scheides, and Kracka, you can't talk shit when all you do is drive around town and do from rolls. Get your ass to the drag strip before you are allowed to be a hypocrite and talk smack..bitches.

Kracka autocrosses, I have no excuse for Scheides.

[goodhart]

Originally Posted by Matt D.

I have no excuse for Scheides.

Does Scheides have any excuses for Scheides? Shit, I've even brought my slow ass WRX to the track!

[awd-drifter]

Originally Posted by goodhart

Whats the new setup? you end up getting that hahn 16G?

lol. no, didnt get the hahn 16g. my "new" setup is actually just a fmic, test pipe, 2g mas, slight tune....and thats it. before, my car was basically in stock form with some heavy 16 inch rims. as of now, i'm puzzled because according to the serial numbers on my turbo, i only have a 14b?!? wtf? previous owner told me it's the big 16g. i'm still doin some research to see if i have the 14b in the car right now lol.

[scheides]

Originally Posted by awd-drifter

lol. no, didnt get the hahn 16g. my "new" setup is actually just a fmic, test pipe, 2g mas, slight tune....and thats it. before, my car was basically in stock form with some heavy 16 inch rims. as of now, i'm puzzled because according to the serial numbers on my turbo, i only have a 14b?!? wtf? previous owner told me it's the big 16g. i'm still doin some research to see if i have the 14b in the car right now lol.

Look at the compressor wheel, does it have 6 blades? If yes, then you have a 16g (of some sort). If there's more, then its a 14b.

[awd-drifter]

Originally Posted by scheides

Look at the compressor wheel, does it have 6 blades? If yes, then you have a 16g (of some sort). If there's more, then its a 14b.

it does have 6 blades instead of the multiple blades like a 14b usually does. I was searching up on dsmtuners and serial codes are pulling up that i have a 14b...? but for now, I'm sure it's a 16g of some sort.

here's a pic when i had it out. serial numbers are quite clear.

[scheides]

Where did you get it from? Maybe someone rebuilt a 14b with a 16g wheel in it (and hopefully machined the housing to fit).

[C3L1CA]

Anybody going out there want to cruise with a couple bikes?

Me and two budies are taking our bikes out there tomorrow and leaving Oakdale around 7ish.

[awd-drifter]

Originally Posted by scheides

Where did you get it from? Maybe someone rebuilt a 14b with a 16g wheel in it (and hopefully machined the housing to fit).

Previous owner of the Galant told me it was the Big 16g......have doubts about it now. ugh...oh well, better motivation to get an Evo 3 turbo for next year!

[asshanson]

So who went this past weekend? For some reason I thought the next event was a week from today, but just read that it's Oct 25th. I was going to get my car all put together and somewhat tuned, but now I have even more time, I'll see if I can make the drive up from Iowa for this.

[C3L1CA]

You guys should make the drive down to cedar falls that weekend instead of ricer falls, that way hopefully tech is a lot easier and the cars without a cage can make as many runs as they want.

[asshanson]

^ For sure, I'll be in Iowa so that's a lot closer for me

I'll start a thread about racing that weekend.

[Swifty1638]

^ true, but then again, I have a cage, and I get kicked out, oh well. I'll take the chance. It's not certified, I don't have a chute, and I don't have the gloves or neck harness stuff.

Brad, you get your turbo back in time and tuned?

[scheides]

Originally Posted by Swifty1638

I'll take the chance. It's not certified, I don't have a chute, and I don't have the gloves or neck harness stuff.

Bwahaha swifty you kill me. Srsly, benchracer's league...let's move continue this discussion in the thread about oct 25th.

[Super Bleeder!!]

Originally Posted by scheides

Bwahaha swifty you kill me. Srsly, benchracer's league...let's move continue this discussion in the thread about oct 25th.

Hey lay off swifty! At least he races something! Benches!

[Swifty1638]

zing. Srsly though, can't a guy dream?

[niterydr]

Originally Posted by Swifty1638

^ true, but then again, I have a cage, and I get kicked out, oh well. I'll take the chance. It's not certified, I don't have a chute, and I don't have the gloves or neck harness stuff.

Brad, you get your turbo back in time and tuned?

Well I live in Savage.

I have a pair of gloves, neckbrace, hell even pants you can probably borrow (I am a bit fat compared to you though) if you REALLY want to go to the track.

I know you enough that you aren't going to steal borrowed equipment. Let me know.

[Swifty1638]

Thanks Josh. Frankly, it's the end of the year, if I really get kicked out of the track, it would not offend me at all. They are kinda, "need it all or nothing" kinda basis. Besides, I'm concerned with traction, lanching, shifting, etc. I don't expect a great time at all. I know the car could MAYBE run a decent time, but can I drive it to that time? Who knows. First time ever at a drag strip, remember?

[mlomker]

Originally Posted by Swifty1638

I'll take the chance. It's not certified, I don't have a chute, and I don't have the gloves or neck harness stuff.

What do your times have to be before you need more safety gear?

[4seasons69]

Originally Posted by mlomker

What do your times have to be before you need more safety gear?

at rockfalls all you need is a helmet until you run 11.49-11.00 then you need a roll bar and when you hit 10.99 you need a roll cage as for other safety gear when your running 11.49 or faster there site says to refer to the nhra rule book