Spring Dyno Day Results and Pics!

[Shane@DBPerformance]

Thanks to everyone for coming out.
The SRT-4 would have easily had the top number, if the tire hadn't blown out.

[blackrosenova400]

Hey Kracka, do they make a better BCS than the gm? I am using the gm BCS and I also hate it.

[Shane@DBPerformance]

The GM BCS is ok on it's own, there are better ones, but the main problem with any BCS on an Evo is going to be the poor manner in which the ECU does boost control.

Originally Posted by blackrosenova400

Hey Kracka, do they make a better BCS than the gm? I am using the gm BCS and I also hate it.

[merkzu]

It works pretty good for me with the JDM MAP sensor and the direct psi boost control mod. The load based boost control kinda sucks though

[311evo]

yeah i have the gm bcs controlled by load, and i am anxious to get the map sensor

[TalonFiero]

Originally Posted by 311evo

yeah i have the gm bcs controlled by load, and i am anxious to get the map sensor

Thats the only way i would really attempt it.

Thanks Mitsustyle and DBPerformance for putting together another fun dyno day! 28 cars is rediculous!

[Kracka]

Originally Posted by blackrosenova400

Hey Kracka, do they make a better BCS than the gm? I am using the gm BCS and I also hate it.

I am going to try pressure-based boost control with the Evo X MAP sensor; if I'm not happy with that then the GM BCS will go into the garbage can.

[DSM_421]

Originally Posted by ecoli

The SRT-4 would have easily had the top number, if the tire hadn't blown out.

Yea the SRT-4 almost made top HP numbers at 4.5k lol. Turbo had just hit full boost, sounded mean.

[Pushit2.0]

Originally Posted by DSM_421

Yea the SRT-4 almost made top HP numbers at 4.5k lol. Turbo had just hit full boost, sounded mean.

They only rev to 6200 rpm, what did it make at 4500rpm? Sorry we could not stay longer, had to finish moving stuff.

~John

[DSM_421]

Originally Posted by Pushit2.0

They only rev to 6200 rpm, what did it make at 4500rpm? Sorry we could not stay longer, had to finish moving stuff.

~John

331 hp

Originally Posted by sleepydsm

I was really impressed by that ricey looking white 2G that made like 339 awhp on a 16G, sidemount IC, using an SAFC2. It really is all about making what u have work together as best they can.

I was talking to that guy, he might of had link not sure, he said he post on the DSMlink boards and that he tuned everything him self. Also he has a built bottom end with higher compression pistons. However, if you were to look under his hood you would swear it's basically stock.

That guy needs to go race people for $100 a race and become a rich man very quickly lol. He even admitted his engine bay looks worse than stock.