Painted the Avenger's 17's

[123abc]

Originally Posted by Mr.98GSX

yea nice work! looks pretty good. How many coats did you put on there? did you use a clear coat?

I put 3 coats on it. No clear coat was used, however I might go back tomorrow and clear coat them after a nice washing.

[Would?]

I don'tenjoy seeing the Laser in the back dismantled.

[twack]

i do its about damn time that thing got taken care of

Originally Posted by Would?

I don'tenjoy seeing the Laser in the back dismantled.

[123abc]

Originally Posted by twack

i do its about damn time that thing got taken care of

That's pretty much how I feel about it too. lol

mike55112= For prepping, I took scuff pad and just roughed up all the area's I was going to paint. Clean them off really good once you're done prepping by blowing them off with compressed air and washing them down too. All I did to paint these was get a few cans of gloss black generic spray paint from the local fleetfarm/hardware store and applied three coats of it. Take you're time with the first coat and apply it slowly but make sure it's thick. To mask off the chrome ring I just stuck an old deck of playing cards between the chrome part and where the alloy(?) part of the wheel meet and it works very well and it beats pulling off masking tape.

You can add clear coat if you wish which is probably not a bad idea. I just got lazy/anxious.

[brando]

Originally Posted by Would?

I don'tenjoy seeing the Laser in the back dismantled.

its a dsm i would get used to it lol j/k

looks decent