MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Brakes / Body / Suspension (http://www.mitsustyle.com/forums/forumdisplay.php?f=92)
-   -   Painted the Avenger's 17's (http://www.mitsustyle.com/forums/showthread.php?t=18978)

123abc 03-29-2008 06:28 PM

Painted the Avenger's 17's
 
Just got done cleaning and painted my avenger's stock 17in 5 spokes.
Pics:

http://www.mitsustyle.com/photopost/...m/DCP02198.JPG

http://www.mitsustyle.com/photopost/...m/DCP02199.JPG

http://www.mitsustyle.com/photopost/...m/DCP02200.JPG

http://www.mitsustyle.com/photopost/...m/DCP02201.JPG

http://www.mitsustyle.com/photopost/...m/DCP02202.JPG

I think it looks pretty damn sick.

Kracka 03-29-2008 06:32 PM

Re: Painted the Avenger's 17's
 
Nice work. What kind of paint did you use?

123abc 03-29-2008 06:39 PM

Re: Painted the Avenger's 17's
 
Just generic fleet farm paint. Used it on the laser's wheels about a year ago and no problems at all.

niterydr 03-29-2008 06:57 PM

Re: Painted the Avenger's 17's
 
Looks good!

123abc 03-29-2008 07:10 PM

Re: Painted the Avenger's 17's
 
Quote:

Originally Posted by niterydr (Post 235052)
Looks good!

Thanks. :)

HiImBrian 03-29-2008 07:52 PM

Re: Painted the Avenger's 17's
 
yea nice work! looks pretty good. How many coats did you put on there? did you use a clear coat?

123abc 03-29-2008 07:54 PM

Re: Painted the Avenger's 17's
 
Quote:

Originally Posted by Mr.98GSX (Post 235058)
yea nice work! looks pretty good. How many coats did you put on there? did you use a clear coat?

I put 3 coats on it. No clear coat was used, however I might go back tomorrow and clear coat them after a nice washing.

Would? 03-30-2008 12:10 AM

Re: Painted the Avenger's 17's
 
I don'tenjoy seeing the Laser in the back dismantled.

:o

twack 03-30-2008 12:40 AM

Re: Painted the Avenger's 17's
 
i do its about damn time that thing got taken care of
Quote:

Originally Posted by Would? (Post 235095)
I don'tenjoy seeing the Laser in the back dismantled.

:o


brando 03-30-2008 01:27 AM

Re: Painted the Avenger's 17's
 
Quote:

Originally Posted by Would? (Post 235095)
I don'tenjoy seeing the Laser in the back dismantled.

:o

its a dsm i would get used to it lol j/k

looks decent

trippleA 03-30-2008 01:44 AM

Re: Painted the Avenger's 17's
 
looks good

mike55112 03-30-2008 02:11 AM

Re: Painted the Avenger's 17's
 
looks nice, Im gonna paint my stock evo 8 wheels tomorrow. Did you use any type of primer, and how did you prep the wheels before painting?

123abc 03-30-2008 08:46 AM

Re: Painted the Avenger's 17's
 
Quote:

Originally Posted by twack (Post 235100)
i do its about damn time that thing got taken care of

That's pretty much how I feel about it too. lol

mike55112= For prepping, I took scuff pad and just roughed up all the area's I was going to paint. Clean them off really good once you're done prepping by blowing them off with compressed air and washing them down too. All I did to paint these was get a few cans of gloss black generic spray paint from the local fleetfarm/hardware store and applied three coats of it. Take you're time with the first coat and apply it slowly but make sure it's thick. To mask off the chrome ring I just stuck an old deck of playing cards between the chrome part and where the alloy(?) part of the wheel meet and it works very well and it beats pulling off masking tape.

You can add clear coat if you wish which is probably not a bad idea. I just got lazy/anxious.

Kevin 1G Drummer 03-30-2008 09:31 AM

Re: Painted the Avenger's 17's
 
If you're going to clearcoat them, it's best to do it right away. That way, there's no chance the base will be too dry for the clear coat to adhere to it properly. If you wait to do it, you'll have to re scuff the base, put another coat on, let it flash off, then put the clear coat on.

123abc 03-30-2008 09:32 AM

Re: Painted the Avenger's 17's
 
Quote:

Originally Posted by Kevin_1G_Drummer (Post 235144)
If you're going to clearcoat them, it's best to do it right away. That way, there's no chance the base will be too dry for the clear coat to adhere to it properly. If you wait to do it, you'll have to re scuff the base, put another coat on, let it flash off, then put the clear coat on.

Thanks for the tip. I might wait then.

FattyBoomBatty 03-30-2008 09:41 AM

Re: Painted the Avenger's 17's
 
I don't like black with chrome lip. You should have done one solid color.

twack 03-30-2008 11:07 AM

Re: Painted the Avenger's 17's
 
Quote:

Originally Posted by FattyBoomBatty (Post 235147)
I don't like black with chrome lip. You should have done one solid color.

good thing it aint your car


All times are GMT -5. The time now is 03:03 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.