Laser's $100 Project Thread

[xveganxcowboyx]

I have some 3" exhaust bends and piping that could be worked into an ecu deal if we do trade up. If you just do one piece back it can be really cheap to do.

Probably have some old skateboard bearings you can have if you want them. (or snag some from some $1 thrift store rollerblades)

$25 for some carbide bits might be worth while as well.

*edit* Also, evo 8 fuel pumps go for cheap. ~$25

[Kracka]

Originally Posted by xveganxcowboyx

Probably have some old skateboard bearings you can have if you want them. (or snag some from some $1 thrift store rollerblades)

$25 for some carbide bits might be worth while as well.

*edit* Also, evo 8 fuel pumps go for cheap. ~$25

Nice thought on the skateboard bearings, thats a lot cheaper than the premade metal bushings; and I can do some cheap hardware store washers for the shifter base! Are all skateboard bearings the same size? I was just checking on eBay and I can get 10 for less than the price of 2 when they are labeled as DSM shifter bushings.

What do I need carbide bits for?

Do EVO pumps bolt into 1G's without too much hassle?