No Oil Pressure

[A//// Guy]

So when you looked at the two oild pans were they similar or not at all? If you didnt look then I dunno but that shouldnt make any difference unless the pickup is blocked but I doubt that.

Unless you left that rag in the pan like JET mentioned which could block the pickup entirely :stick:

It doesnt make sense that it wont pump oil because it did when you drove it there and everything was fine. The welding on the pan might cause a blockup if the hole is plugged but oil would still get sucked up the pickup if it was blocked, which I doubt.

I dont know. The only way the oil pickup couldnt be getting oil is if the old 95 pan was shallower and you could put less oil in it. Maybe you need more oil in this new pan to fill it higher. You should also check to see if the dipstick from the car with the "new" pan came from is any different than your current dipstick from your old oil pan. If it is diff. then maybe you dont have enough oil in the car..... this is really not likely.