MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Classifieds > Mitsu vehicle parts for sale

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-03-2008   #1
SlowWhite
Been there, done that.
 
SlowWhite's Avatar
 

Join Date: Oct 2003
Location: Camden, S.C.
Posts: 3,248
Send a message via AIM to SlowWhite
If I part out my car

***Edit*** - I'm listing prices that I ***THINK*** I paid just to speed up all the questions price's could be high could be low?. - don't be afraid of them. Just a reference, and still make offers.


So I just finished real estate school. And there is a house that's going into forclosure that is to good to pass up. I'm hopefully going to buy/fix up and rent out to try to get some of the money I lost during my divorce.

I have no intention of putting any more money into my eclipse so it's got to go to help fund this project. I know I'd get more for parting it out. If I were to part it out who all would be interested in parts? If I can get enough people to make it worth my while to part it out I'll do that instead. I'll take offers but make them reasonable and don't waste your time or mine please, do your research before hand to figure out pricing, as I will before agreeing to anything.

Buyer pays shipping and handling costs.

Everything would be for sale thats on my car: $6K for entire car (this is low because I'd rather just get rid of it and not have to spend the time tearing it apart or worry about recking my grandmothers garage floor) - if I part don't expect to give offers that reflect the low 6K price tag.

here is a link to pictures of car (from about 3000 miles ago and an old list of mods there are video's on there but of my old turbo set up (3561)
http://www.scottbarton.net/Brian/Eclipse%20Test%20Page/

Performance Mods:
* Rebuilt LSE 6 Bolt Motor - 3000 miles (spun bearing - was caught right as it started to happen but don't know how bad damage is) - I paid $4500 for complete Rebuilt Motor (all I had to do was install turbo, intake, fuel, and wire's)
* Eagle Rods - $400
* Wiseco Pistons - $500
* Commetic Head Gasket Copper Sprayed - $100
* K&N Air Filter with 2G adaptor - $100
* Forced Performance 4" Intake Pipe - $70
* Turbonetics "T3" Cast Exhaust Manifold - $475
* HRC Head to Manifold Spacer Plate - $100
* Tial 38MM External Waiste Gate - $210
* PTE T04S GT3575 Turbo with .63A/R - 300 miles - $1600
* Braided SS Oil Lines with A/N Fittings - $100
* Braided SS Clutch Lines - $80
* Custom 3" 02 Housing by Jet Customs - $200
* Custom 3" Downpipe by Jet Customs - $250
* Custom 1.5" Dump Tube by Jet Customs - included with cost of 02 housing
* Custom 2.5" Short Route I/C Piping by Elite Autosport - $700 with FMIC
* Hose Technic Couplers - $20ea/x3
* Hose Technic Reducers - $30ea/x2
* T-Bolt Clamps - $8-10ea - think there are 8 of them
* Apexi 3" N1 Catback Exhaust - $550
* Apexi Skyline GTR FMIC - See I/C piping (complete kit was $700)
* 2x10" Slim Fans (1000cfm each) - $100set
* Blitz Super Suquential BOV - $250
* 1G DSM Throttle Body - $35
* Magnus 1G Sheet Metal Intake Manifold - $600
* Fuel Injector Clinic 850 Injectors - $280
* ARP Head Studs - $110
* HKS 272/272 Cams - $700
* Complete 1G Head - (there was an oil leak issue after the rebuild that Nash though was the seals? never got fixed though) - $150
* Was supposed to have 1MM oversized valves but not sure if it does
* Fidenza Cam Gears - $180
* Crower Springs & Retainers - $150
* 170 Degree Thermostat - $40
* Fluidyne Radiator - $400
* Taylor 10MM Spark Plug Wires - $150
* NGK BPR7ES Spark Plugs - $20
* Walboro 255hp Fuel Pump-Rewired - $100
* Prothane Motor Mounts - (only sides and front missing 1 of the rear pieces) - $100
* South Bend Clutch - 300 miles no launches - $450
* South Bend FlyWheel - 300 miles no launches - $400
* Stage 4 Shep Tranny with 4 spider center Diff - 300 miles, 1 launch at LSE's but hardly call it a launch 5K slip (compared to my normal 7500K Dump I did on my stock tranny) Tranny fluid changed twice during this time. - $2800 with good core and shipping
* B&M Short Throw Shifter - $100
* Extreme Manual Boost Controller - $80
* Road Race Engineering Oil Catch Can w/Breather - $60
* Sealed Coolant Overflow Bottle forget the company but was require to race at Moroso - $80
* Auto Meter Grey 3 Gauge A Pillar Pod - $80
* Auto Meter Phantom EGT Gauge with Racing Probe - $150
* Auto Meter Phantom 30/30 Boost Gauge - $50
* Auto Meter Phantom Oil Pressure Gauge - $50
* 1995 Socketed Eprom ECU - $250
* DSMLINK Version 2 - $600
* IBM Think Pad Laptop - $500
* Rear Strut Tower Bars - $80
* Front & Rear KYB AGX Adjustable Shocks - $350
* Front & Rear Ground Control Coilovers - $450
* Yellow Top Battery - Type 51R - $150
* 18x8 White Konnig Toxxin's - $800
* Parelli Tires - (about 400 miles on them) No launches only dyno time and 2 pulls against nash's evo, and drive time to and from work) - $500
* I do have an MAFT also New never used still in package - $150

Interior Mods:
* 6 Point Mild Steel Cage - $150 for cage (and $100 per point) total was $750
* Sparco Color 2 Steering Wheel - $250
* Sparco Steering Wheel Adaptor Hub - $50
* Sparco Torino Racing Seats - $1200/pr
* Sparco Fully Adjustable Seat Mounts - $150/ea
* Sparco Pull Up Cam-Lock Lap Belts - ($300 for each complete 6pt harness)
* Sparco 48" Shoulder Harness's
* Sparco Sub Belt - Dual
* Momo Shift Knob - $50
* White Faced Indeglo Dash Gauges w/dimmer - $100
* White Faced Indeglo A/C Gauge Overlay - $50
* Custom Three Tone Interior - what ever
* Custom Vinyl Tweeter Mounts - what ever
* Custom Vinyl Shift Boot - what ever
* Custom Vinyl Arm Rest - what ever

Exterior Mods:
* Altezza Euro Generation 1 Tail Lights - $100
* M3 Side mirrors - got them off Ebay, cheap
* Hyper White Headlights
* Spoilers Etc – Ninja Front Bumper - $150
* Spoilers Etc – Ninja Rear Bumper - $150
* Spoilers Etc – Blitz Low Side Skirts - $150
* 99 Style Reverse Lights - $100
* Painted Center Tail Light Section - what ever

On top of all this all the usual DSM Parts are for sale, doors, hatch, hood, interior, etc, etc,etc

Just let me know what you are interested and what you'd offer. Once I get to 6K in part out, I'll then start the part out process.

Good luck on bids, and Hopefully the parts will go to good homes and to someone that'll make use of them.
The car has been sitting for over a year now if you want new pictures and if I can manage to get a good picture of a part you'd like (ie: car is still together) I'll try and post them apon request.
__________________
1997 GSX - new ride
1997 GSX - dedicated track car
2004 R6 - sold
1992 GSX - sold
1996 GST - sold
1995 GSX - sold
Best 1/4 - 11.7 on 93oct
Best 1/4 MPH - 120mph

Last edited by SlowWhite; 03-04-2008 at 03:08 PM..
SlowWhite is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:37 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.