MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-27-2008   #14
dragonforce
 

Join Date: Mar 2007
Location: brooklyn park, mn
Posts: 168
Re: Clutch hydrolic system

Most likely you have worn out pedal assembly. To check, first you can depress the clutch pedal all way down. Second release the pedal. Third try pulling the pedal up with your hand or foot. Your pedal is worn out if you can feel any movement.
You can fix this by adjusting the rod (temp fix). replace the whole pedal assembly. The best way to fix is to weld the end of pedal rod. I've done few of these.
dragonforce is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:18 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.