06-13-2005
|
#1
|
|
back in the saddle again
|
NEED EVO for prototyping
One of our vendors/associate shops is designing a product for the Evolutions. It is a cast stainless 02 housing, downpipe to come. We need a volunteer evolution in a few weeks that is looking at upgrading for test fitting. The car would be here for a few days tops! The guinea pig car will receive the part at cost, and the labor at a very discounted labor.
Interested individuals please send me your car information, availability, and mods list or future mods list via pm or email (swanny09@yahoo.com).
Thanks all.
-Josh
LSE Performance
p.s. allan if this doesn't go here, move it 
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
|
06-13-2005
|
#2
|
|
back in the saddle again
|
Re: NEED EVO for prototyping
Bump...No evo's up for a hardcore flowing 02 housing? I'll give it another day or two on here.
Any evo owners here anymore?
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
|
|
06-13-2005
|
#3
|
|
formerly ecoli
Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
|
Re: NEED EVO for prototyping
Do they even need a bigger O2 housing? Even the older Evo 3 stuff is plenty big for a 16G.
|
|
|
|
|
06-14-2005
|
#4
|
|
back in the saddle again
|
Re: NEED EVO for prototyping
Everything always needs to be larger  .
These are coming back from the foundary in a few weeks, just figure I'd throw a notice out to the evo owners looking for 'hook-ups'.
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
|
|
06-14-2005
|
#5
|
|
Hellbound
Join Date: Nov 2003
Location: St Paul
Posts: 1,390
|
Re: NEED EVO for prototyping
I don't even think there are EVO people on here anymore.Ryan is a C5 guy now.
__________________
-Nulli Secundus-
|
|
|
|
|
06-14-2005
|
#6
|
|
Is funding Exxon.
Join Date: Oct 2003
Location: Ham Lake
Drives: like a bat outta hell!
Posts: 7,983
|
Re: NEED EVO for prototyping
There is that one dude with the silver one, but I don't see him on at all anymore. I think there are a couple on MNSC.
__________________
Is burning corn and stayin' warm!
My motorcycle is stock and reliable, my Talon is neither!
|
|
|
|
|
06-14-2005
|
#7
|
|
At-Least-It's-White-Again
|
Re: NEED EVO for prototyping
Quote:
|
Originally Posted by niterydr
Everything always needs to be larger . |
If you like boost creep.
__________________
'04 Honda Ricer: stock
Done fuckin' with cars but I will snap some photos of yours for now! =)
|
|
|
|
|
06-14-2005
|
#8
|
|
ConArtist
Join Date: Oct 2003
Posts: 1,960
|
Re: NEED EVO for prototyping
That should be restated as everything always needs to be coordinated. Bigger is not always faster.
__________________
Quick Precision Racing, Inc.
"Always Raising the Bar!"
651-488-7774
|
|
|
|
|
06-14-2005
|
#9
|
Join Date: Jan 2004
Location: Apple Valley, MN
Drives: 2012 Audi S4
Posts: 860
|
Re: NEED EVO for prototyping
Grant from Apple Valley may be interested in this. If you want his number Josh, PM me and I can send it to you. He's got minimal mods, but I know he intends to add a few more things soon.
|
|
|
|
|
06-15-2005
|
#10
|
|
Business as usual
Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
|
Re: NEED EVO for prototyping
When you talk the the fabrictor (NSANE) tell him he still owes me a 91-94 CAS.
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
|
|
|
|
|
06-15-2005
|
#11
|
|
back in the saddle again
|
Re: NEED EVO for prototyping
Quote:
|
Originally Posted by Carlos
When you talk the the fabrictor (NSANE) tell him he still owes me a 91-94 CAS.
|
Well since he isn't the fabricator, how about you talk to him? His 'NSANE' customs was is attempt of branding a product another shop made for him and market himself.
I know there aren't very many evo guys on here I was just hoping someone would know someone with an evo. Thanks to supersleeper for staying on topic. please pm that number, Otherwise I'll go post on one of the national evo boards.
Everyone else, thanks for the great input   I figured you could put 5" exhaust on a rio and run 9's, I better go back to the drawing board .
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
Last edited by niterydr; 06-15-2005 at 01:59 PM..
|
|
|
|
|
06-15-2005
|
#12
|
|
Banned
Join Date: Dec 2003
Location: Boulder, CO
Drives: Conquest
Posts: 5,049
|
Re: NEED EVO for prototyping
i dunno, but i gained about 150 hp from my 3 inch exhaust. i can only imagine what four would do, let alone 5.
btw, raptor, my timing was too advanced
|
|
|
|
|
06-15-2005
|
#13
|
|
back in the saddle again
|
Re: NEED EVO for prototyping
Quote:
|
Originally Posted by Conquests are better
i dunno, but i gained about 150 hp from my 3 inch exhaust. i can only imagine what four would do, let alone 5.
btw, raptor, my timing was too advanced
|
LMAO! Ever see that picture of a 90's accord with something like a 12" diameter tip!
Dane-Thanks again for the lead, we might beable to work out something that works.
If anyone else is interested/knows of someone, feel free to send me there info!
Regards
-josh
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
|
|
06-15-2005
|
#14
|
|
Asshat King
Join Date: Oct 2003
Location: Decorah / Ames, Iowa
Posts: 3,683
|
Re: NEED EVO for prototyping
Quote:
|
Originally Posted by JET
There is that one dude with the silver one, but I don't see him on at all anymore. I think there are a couple on MNSC.
|
EvilEVO?
__________________
DSMSTYLE MAFIA - Holdin' Down the Cornfields of IA
'92 Laser RS AWD & '01 Grand Prix GTP
Proud to be a Cyclone
Check it out: Racers Against Street Racing |
|
|
|
|
06-15-2005
|
#15
|
|
ConArtist
Join Date: Oct 2003
Posts: 1,960
|
Re: NEED EVO for prototyping
Quote:
|
Originally Posted by Conquests are better
i dunno, but i gained about 150 hp from my 3 inch exhaust. i can only imagine what four would do, let alone 5.
btw, raptor, my timing was too advanced
|
Not surprised, Helps to plug the vacuum line to the distributer when setting em.
__________________
Quick Precision Racing, Inc.
"Always Raising the Bar!"
651-488-7774
|
|
|
|
|
06-15-2005
|
#16
|
|
|
Re: NEED EVO for prototyping
Quote:
|
Originally Posted by Jakey
EvilEVO?
|
Yeah Tim might be interested. If you need his email address PM me, Vassil is good friends with him, he probably has it too.
__________________
Quote:
|
Originally Posted by shoutbox
cmspaz: Someone buys me a rubber fist, and I'll rock it on my hood.
|
|
|
|
|
|
06-16-2005
|
#17
|
|
Is funding Exxon.
Join Date: Oct 2003
Location: Ham Lake
Drives: like a bat outta hell!
Posts: 7,983
|
Re: NEED EVO for prototyping
yep, evilevo is the one I was thinking of.
__________________
Is burning corn and stayin' warm!
My motorcycle is stock and reliable, my Talon is neither!
|
|
|
|
|
06-16-2005
|
#18
|
|
The RTFVfaq Guy
Join Date: Jan 2004
Location: Winona MN
Posts: 479
|
Re: NEED EVO for prototyping
I'm not sure if he still has his old O2 housing, he recently updated...
http://www.thedrunken.com/gallery/ma...g2_itemId=8615
__________________
"We are the music makers, and we are the dreamers of dreams."
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
Linear Mode
