Putting performance Cams in a 99 GS-T

DSM-is-LOVE · 06-04-2010

So I bought a set of comp 101100 cams for my 99 GS-T Spyder, and I was reading my Haynes manual about putting them in, now my only question really is, will the torque specs be the same and what not? I mean I know the lobes are really the only things that are bigger, but not exactly sure.

Anyone want to help me as well, considering i've never done this before...?

**Goat Blower** · 06-04-2010

Torque specs on what? The cam caps? Yes. They drop in like any stock cams, follow the Hayne's procedure which unfortunately requires a timing belt job to do it right.

You will want to make sure those cams don't require upgraded springs and retainers though, I'm not familiar with their products anymore.

tpunx99GSX · 06-04-2010

Quote:

Originally Posted by Goat Blower

You will want to make sure those cams don't require upgraded springs and retainers though, I'm not familiar with their products anymore.

Those cams dont require it. Nearest equivilant to that came is a 262 hks or less. I had 101200s on my car and they were fine.

**scheides** · 06-04-2010

Good cams, I had the 200's in my blue 1G and they were fine on stock springs. Good 16g setup!

Search around for a real how-to, doing the full timing belt is silly.

oh wait, here you go:
http://www.vfaq.com/mods/wayback/4g63cams.html

turbotalon1g · 06-04-2010

zip ties are your friend on this one.

Same Tq, just get the order right and feel free to use some loctite if you are scared. blue preferably.