Putting performance Cams in a 99 GS-T
 

So I bought a set of comp 101100 cams for my 99 GS-T Spyder, and I was reading my Haynes manual about putting them in, now my only question really is, will the torque specs be the same and what not? I mean I know the lobes are really the only things that are bigger, but not exactly sure.

Anyone want to help me as well, considering i've never done this before...? :D

Re: Putting performance Cams in a 99 GS-T
 

Torque specs on what? The cam caps? Yes. They drop in like any stock cams, follow the Hayne's procedure which unfortunately requires a timing belt job to do it right.

You will want to make sure those cams don't require upgraded springs and retainers though, I'm not familiar with their products anymore.

Re: Putting performance Cams in a 99 GS-T
 

Those cams dont require it. Nearest equivilant to that came is a 262 hks or less. I had 101200s on my car and they were fine.

Re: Putting performance Cams in a 99 GS-T
 

Good cams, I had the 200's in my blue 1G and they were fine on stock springs. Good 16g setup!

Search around for a real how-to, doing the full timing belt is silly.

oh wait, here you go:
http://www.vfaq.com/mods/wayback/4g63cams.html

Re: Putting performance Cams in a 99 GS-T
 

zip ties are your friend on this one.

Same Tq, just get the order right and feel free to use some loctite if you are scared. blue preferably.